.TH Psfig/TeX 1
.SH NAME
Psfig/TeX (1.10) \- PostScript figures in TeX
.SH SYNTAX
\\\fBinput psfig\fP
.SH DESCRIPTION
.B Psfig/TeX
is a macro package for TeX, as well as LaTeX, that facilitates the
inclusion of PostScript figures into (La)TeX documents.
With the help of a compatible postprocessor, PostScript figures are
automatically scaled and positioned on the page, and the proper amount
of space is reserved.
Figures can be presented as traditional broken-out displays,
and Custom characters may be created and used freely throughout a document.
.PP
The \fBdvips\fP program developed by Tomas Rokicki has full
\fBpsfig\fP support. The \fBOzTeX\fP package has support for
all \fBpsfig\fp functions except compressed figures.
.PP
.SH USAGE
To include a figure with \fBpsfig\fP, include the \fBpsfig\fP style at
the top of your document.
In LaTeX: ``\\\fBdocumentstyle\fP[psfig,...]{article}''; in TeX:
``\\\fBinput\fP psfig''.
Then invoke the macro ``\\\fBpsfig\fP{figure=\fIfilename\fP}'', where
\fIfilename\fP is the name of a PostScript file.
.B Psfig
will automatically position the figure at the current
point on the page, and reserve the proper amount of space.
.PP
.SH OPTIONS
Options may be specified in the form
``\\\fBpsfig\fP{figure=\fIfilename\fP,\fIoption\fP=\fIvalue\fP,\fIoption\fP=\fIvalue\fP,...}'';
recognized options include \fBheight\fP, \fBwidth\fP, \fBrheight\fP,
\fBrwidth\fP, \fBclip\fP, and \fBangle\fP.
.IP height 9
The ``\fBheight\fP=\fIdimen\fP'' option specifies how tall the
figure should be on the page.
When no \fBwidth\fP is specified, the figure is scaled equally
in both dimensions.
.IP width
The ``\fBwidth\fP=\fIdimen\fP'' option specifies how wide the
figure should be on the page.
When no \fBheigth\fP is specified, the figure is scaled equally
in both dimensions.
.IP
If no \fBheight\fP or \fBwidth\fP option is given, the figure's
`natural' size will be used.
By listing both a \fBheight\fP and \fBwidth\fP, figures can be scaled
disproportionately.
.IP rheight
There are two sizes associated with each \fBpsfig\fP figure: the size
at which it is to be printed on the page and the size it reserves
in TeX.
This latter size is appropriately termed the reserved size, and is
expressed as an option of the form ``\fBrheight\fP=\fIdimen\fP'',
to reserve a vertical size of \fIdimen\fP.
If omitted, the reserved size defaults to the real size.
Some special effects need to be transparent to TeX and thus have a
zero reserved size, such as a grey box enclosing a paragraph.
.IP rwidth
To reserve a width in TeX, the ``\fBrwidth\fP=\fIdimen\fP''
option is used.
.IP clip
The ``\fBclip\fP=t'' option sets the PostScript clipping path
so that no marks will show up outside the declared bounding box.
This option allows the user to isolate part of a larger figure,
by specifying a new bounding box:
``\\\fBpsfig\fP{figure=figs/piechart.ps,height=2in,bbllx=306bp,%
bblly=396bp,bburx=486bp,bbury=546bp,clip=}''
.IP angle
Figures can be rotated by \fBpsfig\fP using the ``\fBangle\fP=\fIdegrees\fP''
option.
Example:
``\\\fBpsfig\fP{figure=figs/rosette.ps,height=1.0in,angle=90}''.
.PP
.SH AUTOSCALING
With autoscaling, some rotated figures come out smaller because the
diagonal of their bounding box is longer than their \fBheight\fP
or \fBwidth\fP alone.
This behavior can be disabled with \\\fBpsscalefirst\fP, and re-enabled
with  \\\fBpsrotatefirst\fP.
With \\\fBpsscalefirst\fP a new \fBheight\fP and \fBwidth\fP are
computed after the bounding box.
While the rotated figures will all come out at the same size, their
reserved sizes will be different, thus they may not be aligned
correctly.
.PP
.SH SOURCES OF FIGURES
Any PostScript program can be used as a
\fBpsfig\fP figure, as long as it adheres to the
Encapsulated PostScript Format (EPSF), which
dictates a set of forbidden operators and a comment
structuring convention. \fBPsfig\fP
is actually less restrictive than the EPSF requirements; it can handle
some of the "non-compliant" postscript operators, and the only
required comment is the Bounding Box comment (see below).
.PP
.SH BOUNDING BOXES
To properly translate and scale a figure \fBpsfig\fP must know
its `natural' position on the page; this information is present
in the `bounding box comment' of a PostScript program.
This is a line of the form
``%%BoundingBox: \fIbbllx bblly bburx bbury\fP'' in the header of
the file.
.PP
The  bounding box specifies four coordinates of a rectangle that
defines the outermost edges of the PostScript figure: the lower-left
\fIx\fP coordinate (\fIbbllx\fP), the lower-left \fIy\fP coordinate
(\fIbblly\fP), the upper-right \fIx\fP coordinate (\fIbburx\fP), and
the upper-right \fIy\fP coordinate (\fIbbury\fP).
This rectangle must be present in any file to be used as a
\fBpsfig\fP figure.
Most modern graphics packages produce (encapsulated) PostScript
files which contain a ``%%BoundingBox:'' comment line in the header.
All \fIbb...\fP values are in  points, relative to the default
transformation matrix.
.PP
.SH MISSING BOUNDING BOX
When no bounding box comment line is present in your PostScript file,
you can edit one in.
The only mandatory PostScript convention is that the first line of
the file should begin with the characters `%!'.
A good place for the bounding box comment is the second line of
the file.
.PP
The bounding box values may also be specified directly in the
\\\fBpsfig\fP argument, using clauses of the form
``bbllx=\fIbbllx\fP,bblly=\fIbblly\fP,...'', in which case
the figure file is not searched for the bounding box.
.PP
To control the amount of white space around a figure in a (La)TeX
document, it may be necessary to experiment with the bounding box
parameters \fIbb...\fP, also in cases where the bounding box is
provided by the plot or graphics package.
.PP
.SH DRAFT FIGURES
Some PostScript figures take quite a long time to transmit and print;
for these figures a draft mode is available to speed printing of draft
versions of the document.
A figure printed in draft mode will appear as an empty box.
The macro \\\fBpsdraft\fP will switch into draft mode, and all
subsequent \fBpsfig\fP macros will produce draft figures until reaching
the macro  \\\fBpsfull\fP, which switches out of draft mode.
.PP
No \\\fBspecial\fP commands are used in draft mode, so a draft document
can be previewed using \fIany\fP DVI viewer.
The printing of boxes in draft mode can be disabled/enabled with 
\\\fBpsnodraftbox\fP and  \\\fBpsdraftbox\fP.
.PP
.SH SILENT MODE
Normally, \fBpsfig\fP will print advisory messages to remind you that it is
including figures as (La)TeX processes a document. This behavior can
be disabled with \\\fBpssilent\fP, and re-enabled with \\\fBpsnoisy\fP.
.PP
.SH COMPRESSED POSTSCRIPT FILES
As off version 1.9, \fBpsfig\fP allows the inclusion of compressed
PostScript files (when using \fBdvips\fP).
.PP
To compress PostScript files, the shell script \fBpscompress\fP is used.
\fBPscompress\fP produces two files: \fIfilename\fP.bb and \fIfilename\fP.Z.
The first file contains the bounding box comment only, while the second
file contains the actual compressed PostScript file.
Usage: ``% \fBpscompress\fP \fIfilename\fP''.
.PP
When (La)TeX is run on \fIyour_document\fP.tex, the file \fIfilename\fP.bb
is scanned for the bounding box comment, to allow (La)TeX to properly
reserve the right size for the figure.
Only when the file \fIyour_document\fP.dvi is printed by means of \fBdvips\fP,
the actual PostScript file \fIfilename\fP.Z is decompressed (\fBzcat\fP-ed)
and included in \fIyour_document\fP.ps.
.PP
.SH MACINTOSH FIGURES
Since the Macintosh drawing applications produce PostScript, they can
be used to create figures.
However, the PostScript produced by most Macintosh applications is often
not well
suited to be included directly as a \fBpsfig\fP figure, unless it is
saved as an "EPSF compliant" file. If the file is not "EPSF compliant"
then the postscript may have to be edited before being used
as an included figure. See the \fBpsfig\fP tool \fBcleanfig\fP
and the sample document \fBmacdemo.tex\fP for guidance.
.PP
Non-EPSF Macintosh PostScript files often
require a ``Laserprep'' prolog in order to
be properly printed.
A laserprep prolog can be included with the \fBdvips\fP special
header command at the top of your (La)TeX file:
``\\\fBspecial\fP{header=lprep70.procs}''.
\fBPsfig\fP provides `lprep68.procs', as well as `lprep70.procs',
to suit various versions of the Macintosh applications.
.PP
.SH FIGURE SEARCH PATH
Psfig first searches in the current directory for a figure (or
in the specified directory if given an absolute path). If it fails
to find the figure in the current directory, it optionally searches
a search path of figure directories to see if the figure is
present. To specify the figure search path, use
"\\psfigurepath{dir1:dir2:...:dirn}",
where dir1...dirn are the directories figures are to be found in.
.PP
.SH PROBLEMS
.IP Problem: 10
The page with graphics is not printed.
.IP Solution: 10
Remove lines containing `\fBshowpage\fP' and/or `\fBstop\fP'
from the PostScript graphics file.
Lines of this kind are usually found near the end of the file.
.IP Problem: 10
The figure is positioned in weird places.
.IP
Generally, this is an indication that the PostScript ``%%BoundingBox:''
comment is missing.
It may also be that a translation takes places \fIafter\fP the
bounding box was determined.
.RE
.IP Solution:  10
Edit a bounding box comment into the PostScript file
and/or experiment with the \fIbb...\fP values (see: MISSING BOUNDING
BOX above).
.PP
.SH BUGS
The \\\fBpsfig\fP macro is (unfortunately) sensitive to whitespace,
and will be confused by any extra spaces or newlines in its argument.
.PP
The LaTeX \fBletter\fP style must be loaded after the
\\\fBpsfig\fP macros due to naming conflicts. This can be
forced by including psfig with an explicit \\\fBinput\fP
command before the \\\fBdocumentstyle\fP command.
.PP
.SH ACKNOWLEDGEMENTS
This work was done while the author was with the Department of
Computer and Information Science, University of Pennsylvania.  Ned
Batchelder co-developed the original troff version of this
program with the author, and was responsible for much of the overall
design.  For more detailed information on the original version of 
see \fIPsfig \- A Ditroff Preprocessor for PostScript Figures\fP in
the USENIX 87 proceedings, or \fIBringing troff up to speed\fP in the
July 1987 issue of Unix Review.
.PP
Greg Hager provided the initial pure-TeX implementation of \fBpsfig\fP.
J. Daniel Smith of Schlumberger CAD/CAM implemented the rotation
feature and improved the file scanning routines, using certain code
fragments from Tom Rokicki's \fBdvips\fP program.
.PP
Thanks to Sake Hogeveen (hogeveen.fys.ruu.nl) for editing this man page.
.SH AUTHOR
Trevor Darrell
.PP
.SH SEE ALSO
tex(1), latex(1), dvips(1), psfig-troff(1)
.PP
A printed version of the psfig-tex manual may be obtained by typing
.br
``% \fBlatex\fP psfig-doc'', then ``% \fBdvips\fP psfig-doc'',
.br
and finally printing the resulting psfig-doc.ps file on your nearest
PostScript printer.
The manual provides many examples with real-life PostScript graphics,
see the text of psfig-doc.tex for more usage examples.