commit f0feeec9c246f6518e168daec66d92a4a6bf0965 Author: Greg Kroah-Hartman Date: Sat Feb 3 17:04:31 2018 +0100 Linux 4.4.115 commit f84a8d446a16379df5844bc2bd50f0b7431a4718 Author: Stefan Agner Date: Sun Jan 7 15:05:49 2018 +0100 spi: imx: do not access registers while clocks disabled commit d593574aff0ab846136190b1729c151c736727ec upstream. Since clocks are disabled except during message transfer clocks are also disabled when spi_imx_remove gets called. Accessing registers leads to a freeeze at least on a i.MX 6ULL. Enable clocks before disabling accessing the MXC_CSPICTRL register. Fixes: 9e556dcc55774 ("spi: spi-imx: only enable the clocks when we start to transfer a message") Signed-off-by: Stefan Agner Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit ec73ade66474b645f2322d78e80746310e657399 Author: Fabio Estevam Date: Thu Jan 4 15:58:34 2018 -0200 serial: imx: Only wakeup via RTSDEN bit if the system has RTS/CTS commit 38b1f0fb42f772b8c9aac53593883a18ff5eb9d7 upstream. The wakeup mechanism via RTSDEN bit relies on the system using the RTS/CTS lines, so only allow such wakeup method when the system actually has RTS/CTS support. Fixes: bc85734b126f ("serial: imx: allow waking up on RTSD") Signed-off-by: Fabio Estevam Reviewed-by: Martin Kaiser Acked-by: Fugang Duan Signed-off-by: Greg Kroah-Hartman commit d489d1e03ca2a1dc39028726974658714cbb6aca Author: Mark Salyzyn Date: Thu Feb 1 07:37:04 2018 -0800 selinux: general protection fault in sock_has_perm In the absence of commit a4298e4522d6 ("net: add SOCK_RCU_FREE socket flag") and all the associated infrastructure changes to take advantage of a RCU grace period before freeing, there is a heightened possibility that a security check is performed while an ill-timed setsockopt call races in from user space. It then is prudent to null check sk_security, and if the case, reject the permissions. Because of the nature of this problem, hard to duplicate, no clear path, this patch is a simplified band-aid for stable trees lacking the infrastructure for the series of commits leading up to providing a suitable RCU grace period. This adjustment is orthogonal to infrastructure improvements that may nullify the needed check, but could be added as good code hygiene in all trees. general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 14233 Comm: syz-executor2 Not tainted 4.4.112-g5f6325b #28 task: ffff8801d1095f00 task.stack: ffff8800b5950000 RIP: 0010:[] [] sock_has_perm+0x1fe/0x3e0 security/selinux/hooks.c:4069 RSP: 0018:ffff8800b5957ce0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 1ffff10016b2af9f RCX: ffffffff81b69b51 RDX: 0000000000000002 RSI: 0000000000000000 RDI: 0000000000000010 RBP: ffff8800b5957de0 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000000 R11: 1ffff10016b2af68 R12: ffff8800b5957db8 R13: 0000000000000000 R14: ffff8800b7259f40 R15: 00000000000000d7 FS: 00007f72f5ae2700(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000a2fa38 CR3: 00000001d7980000 CR4: 0000000000160670 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: ffffffff81b69a1f ffff8800b5957d58 00008000b5957d30 0000000041b58ab3 ffffffff83fc82f2 ffffffff81b69980 0000000000000246 ffff8801d1096770 ffff8801d3165668 ffffffff8157844b ffff8801d1095f00 ffff880000000001 Call Trace: [] selinux_socket_setsockopt+0x4d/0x80 security/selinux/hooks.c:4338 [] security_socket_setsockopt+0x7d/0xb0 security/security.c:1257 [] SYSC_setsockopt net/socket.c:1757 [inline] [] SyS_setsockopt+0xe8/0x250 net/socket.c:1746 [] entry_SYSCALL_64_fastpath+0x16/0x92 Code: c2 42 9b b6 81 be 01 00 00 00 48 c7 c7 a0 cb 2b 84 e8 f7 2f 6d ff 49 8d 7d 10 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 83 01 00 00 41 8b 75 10 31 RIP [] sock_has_perm+0x1fe/0x3e0 security/selinux/hooks.c:4069 RSP ---[ end trace 7b5aaf788fef6174 ]--- Signed-off-by: Mark Salyzyn Acked-by: Paul Moore Cc: Eric Dumazet Cc: Stephen Smalley Cc: selinux@tycho.nsa.gov Cc: linux-security-module@vger.kernel.org Cc: Eric Paris Cc: Serge E. Hallyn Cc: linux-kernel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 1bbdf7649ffef49ba5cd1d08cf488d1b2e9ffd40 Author: Oliver Neukum Date: Thu Jan 11 13:10:16 2018 +0100 usb: uas: unconditionally bring back host after reset commit cbeef22fd611c4f47c494b821b2b105b8af970bb upstream. Quoting Hans: If we return 1 from our post_reset handler, then our disconnect handler will be called immediately afterwards. Since pre_reset blocks all scsi requests our disconnect handler will then hang in the scsi_remove_host call. This is esp. bad because our disconnect handler hanging for ever also stops the USB subsys from enumerating any new USB devices, causes commands like lsusb to hang, etc. In practice this happens when unplugging some uas devices because the hub code may see the device as needing a warm-reset and calls usb_reset_device before seeing the disconnect. In this case uas_configure_endpoints fails with -ENODEV. We do not want to print an error for this, so this commit also silences the shost_printk for -ENODEV. ENDQUOTE However, if we do that we better drop any unconditional execution and report to the SCSI subsystem that we have undergone a reset but we are not operational now. Signed-off-by: Oliver Neukum Reported-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman commit 68b43caf4a4b98256bdb67dba025f858bdf21725 Author: Hemant Kumar Date: Tue Jan 9 12:30:53 2018 +0530 usb: f_fs: Prevent gadget unbind if it is already unbound commit ce5bf9a50daf2d9078b505aca1cea22e88ecb94a upstream. Upon usb composition switch there is possibility of ep0 file release happening after gadget driver bind. In case of composition switch from adb to a non-adb composition gadget will never gets bound again resulting into failure of usb device enumeration. Fix this issue by checking FFS_FL_BOUND flag and avoid extra gadget driver unbind if it is already done as part of composition switch. This fixes adb reconnection error reported on Android running v4.4 and above kernel versions. Verified on Hikey running vanilla v4.15-rc7 + few out of tree Mali patches. Reviewed-at: https://android-review.googlesource.com/#/c/582632/ Cc: Felipe Balbi Cc: Greg KH Cc: Michal Nazarewicz Cc: John Stultz Cc: Dmitry Shmidt Cc: Badhri Cc: Android Kernel Team Signed-off-by: Hemant Kumar [AmitP: Cherry-picked it from android-4.14 and updated the commit log] Signed-off-by: Amit Pundir Signed-off-by: Greg Kroah-Hartman commit bab3a0dac8966ee9dd5f442098957ff15c7f7216 Author: Johan Hovold Date: Thu Jan 18 14:46:41 2018 +1100 USB: serial: simple: add Motorola Tetra driver commit 46fe895e22ab3845515ec06b01eaf1282b342e29 upstream. Add new Motorola Tetra (simple) driver for Motorola Solutions TETRA PEI devices. D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0cad ProdID=9011 Rev=24.16 S: Manufacturer=Motorola Solutions Inc. S: Product=Motorola Solutions TETRA PEI interface C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) Note that these devices do not support the CDC SET_CONTROL_LINE_STATE request (for any interface). Reported-by: Max Schulze Tested-by: Max Schulze Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 46c651aea6afd5c517fa759d91d730ff5408136c Author: Shuah Khan Date: Wed Jan 17 12:08:03 2018 -0700 usbip: list: don't list devices attached to vhci_hcd commit ef824501f50846589f02173d73ce3fe6021a9d2a upstream. usbip host lists devices attached to vhci_hcd on the same server when user does attach over localhost or specifies the server as the remote. usbip attach -r localhost -b busid or usbip attach -r servername (or server IP) Fix it to check and not list devices that are attached to vhci_hcd. Signed-off-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman commit a7d225692e2adc3c50ba41c8225301b1a67cb7d3 Author: Shuah Khan Date: Wed Jan 17 12:07:30 2018 -0700 usbip: prevent bind loops on devices attached to vhci_hcd commit ef54cf0c600fb8f5737fb001a9e357edda1a1de8 upstream. usbip host binds to devices attached to vhci_hcd on the same server when user does attach over localhost or specifies the server as the remote. usbip attach -r localhost -b busid or usbip attach -r servername (or server IP) Unbind followed by bind works, however device is left in a bad state with accesses via the attached busid result in errors and system hangs during shutdown. Fix it to check and bail out if the device is already attached to vhci_hcd. Signed-off-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman commit 95bb041eefc4fb4fd613cd2857ec76ea7e47fda9 Author: Jia-Ju Bai Date: Wed Dec 13 20:34:36 2017 +0800 USB: serial: io_edgeport: fix possible sleep-in-atomic commit c7b8f77872c73f69a16528a9eb87afefcccdc18b upstream. According to drivers/usb/serial/io_edgeport.c, the driver may sleep under a spinlock. The function call path is: edge_bulk_in_callback (acquire the spinlock) process_rcvd_data process_rcvd_status change_port_settings send_iosp_ext_cmd write_cmd_usb usb_kill_urb --> may sleep To fix it, the redundant usb_kill_urb() is removed from the error path after usb_submit_urb() fails. This possible bug is found by my static analysis tool (DSAC) and checked by my code review. Signed-off-by: Jia-Ju Bai Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit aaea9d3f6c0b28ce8a1a9ce306089471bb1264a8 Author: Oliver Neukum Date: Thu Jan 18 12:13:45 2018 +0100 CDC-ACM: apply quirk for card reader commit df1cc78a52491f71d8170d513d0f6f114faa1bda upstream. This devices drops random bytes from messages if you talk to it too fast. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman commit 9d851e1525852493158f496ee5efc0a79f45da74 Author: Hans de Goede Date: Sun Jan 14 16:09:00 2018 +0100 USB: cdc-acm: Do not log urb submission errors on disconnect commit f0386c083c2ce85284dc0b419d7b89c8e567c09f upstream. When disconnected sometimes the cdc-acm driver logs errors like these: [20278.039417] cdc_acm 2-2:2.1: urb 9 failed submission with -19 [20278.042924] cdc_acm 2-2:2.1: urb 10 failed submission with -19 [20278.046449] cdc_acm 2-2:2.1: urb 11 failed submission with -19 [20278.049920] cdc_acm 2-2:2.1: urb 12 failed submission with -19 [20278.053442] cdc_acm 2-2:2.1: urb 13 failed submission with -19 [20278.056915] cdc_acm 2-2:2.1: urb 14 failed submission with -19 [20278.060418] cdc_acm 2-2:2.1: urb 15 failed submission with -19 Silence these by not logging errors when the result is -ENODEV. Signed-off-by: Hans de Goede Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman commit 80a2a5dbdc2622040f6c14b709293757b4fe51de Author: Greg Kroah-Hartman Date: Thu Jan 25 09:48:55 2018 +0100 USB: serial: pl2303: new device id for Chilitag commit d08dd3f3dd2ae351b793fc5b76abdbf0fd317b12 upstream. This adds a new device id for Chilitag devices to the pl2303 driver. Reported-by: "Chu.Mike [朱堅宜]" Acked-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 1821d49ab7f313b3eb5fdbb3166ef18d79aa5134 Author: OKAMOTO Yoshiaki Date: Tue Jan 16 09:51:17 2018 +0000 usb: option: Add support for FS040U modem commit 69341bd15018da0a662847e210f9b2380c71e623 upstream. FS040U modem is manufactured by omega, and sold by Fujisoft. This patch adds ID of the modem to use option1 driver. Interface 3 is used as qmi_wwan, so the interface is ignored. Signed-off-by: Yoshiaki Okamoto Signed-off-by: Hiroyuki Yamamoto Acked-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 46a7fd70437702432ab642cc3455e8cd6b72f43f Author: Larry Finger Date: Sat Nov 25 13:32:38 2017 -0600 staging: rtl8188eu: Fix incorrect response to SIOCGIWESSID [ Upstream commit b77992d2df9e47144354d1b25328b180afa33442 ] When not associated with an AP, wifi device drivers should respond to the SIOCGIWESSID ioctl with a zero-length string for the SSID, which is the behavior expected by dhcpcd. Currently, this driver returns an error code (-1) from the ioctl call, which causes dhcpcd to assume that the device is not a wireless interface and therefore it fails to work correctly with it thereafter. This problem was reported and tested at https://github.com/lwfinger/rtl8188eu/issues/234. Signed-off-by: Larry Finger Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 380d05ee26dcf075a87bfbf97fdfe33035a8beeb Author: Colin Ian King Date: Tue Nov 14 16:18:28 2017 +0000 usb: gadget: don't dereference g until after it has been null checked [ Upstream commit b2fc059fa549fe6881d4c1f8d698b0f50bcd16ec ] Avoid dereferencing pointer g until after g has been sanity null checked; move the assignment of cdev much later when it is required into a more local scope. Detected by CoverityScan, CID#1222135 ("Dereference before null check") Fixes: b785ea7ce662 ("usb: gadget: composite: fix ep->maxburst initialization") Signed-off-by: Colin Ian King Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 8d594f95698a098516c7e94fb92a4764e4dec4d0 Author: Icenowy Zheng Date: Sun Apr 16 02:51:16 2017 -0400 media: usbtv: add a new usbid [ Upstream commit 04226916d2360f56d57ad00bc48d2d1854d1e0b0 ] A new usbid of UTV007 is found in a newly bought device. The usbid is 1f71:3301. The ID on the chip is: UTV007 A89029.1 1520L18K1 Both video and audio is tested with the modified usbtv driver. Signed-off-by: Icenowy Zheng Acked-by: Lubomir Rintel Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit d8933268bd5d84b2996ce70e1d8061702395675f Author: Gustavo A. R. Silva Date: Mon Nov 20 08:12:29 2017 -0600 scsi: ufs: ufshcd: fix potential NULL pointer dereference in ufshcd_config_vreg [ Upstream commit 727535903bea924c4f73abb202c4b3e85fff0ca4 ] _vreg_ is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Fix this by moving the pointer dereference after _vreg_ has been null checked. This issue was detected with the help of Coccinelle. Fixes: aa4976130934 ("ufs: Add regulator enable support") Signed-off-by: Gustavo A. R. Silva Reviewed-by: Subhash Jadavani Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 03c2854d14bc4f55b145a9dc94ecdb03b9a231b3 Author: Guilherme G. Piccoli Date: Fri Nov 17 19:14:55 2017 -0200 scsi: aacraid: Prevent crash in case of free interrupt during scsi EH path [ Upstream commit e4717292ddebcfe231651b5aff9fa19ca158d178 ] As part of the scsi EH path, aacraid performs a reinitialization of the adapter, which encompass freeing resources and IRQs, NULLifying lots of pointers, and then initialize it all over again. We've identified a problem during the free IRQ portion of this path if CONFIG_DEBUG_SHIRQ is enabled on kernel config file. Happens that, in case this flag was set, right after free_irq() effectively clears the interrupt, it checks if it was requested as IRQF_SHARED. In positive case, it performs another call to the IRQ handler on driver. Problem is: since aacraid currently free some resources *before* freeing the IRQ, once free_irq() path calls the handler again (due to CONFIG_DEBUG_SHIRQ), aacraid crashes due to NULL pointer dereference with the following trace: aac_src_intr_message+0xf8/0x740 [aacraid] __free_irq+0x33c/0x4a0 free_irq+0x78/0xb0 aac_free_irq+0x13c/0x150 [aacraid] aac_reset_adapter+0x2e8/0x970 [aacraid] aac_eh_reset+0x3a8/0x5d0 [aacraid] scsi_try_host_reset+0x74/0x180 scsi_eh_ready_devs+0xc70/0x1510 scsi_error_handler+0x624/0xa20 This patch prevents the crash by changing the order of the deinitialization in this path of aacraid: first we clear the IRQ, then we free other resources. No functional change intended. Signed-off-by: Guilherme G. Piccoli Reviewed-by: Raghava Aditya Renukunta Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit dfd0feb42fc522a934e8b77fd8c2353f2c25f5af Author: Darrick J. Wong Date: Mon Nov 27 09:50:17 2017 -0800 xfs: ubsan fixes [ Upstream commit 22a6c83777ac7c17d6c63891beeeac24cf5da450 ] Fix some complaints from the UBSAN about signed integer addition overflows. Signed-off-by: Darrick J. Wong Reviewed-by: Brian Foster Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 15e1f5cf9bff882d6948c38a6e61780e55d39c16 Author: Christophe JAILLET Date: Sun Sep 24 08:01:03 2017 +0200 drm/omap: Fix error handling path in 'omap_dmm_probe()' [ Upstream commit 8677b1ac2db021ab30bb1fa34f1e56ebe0051ec3 ] If we don't find a matching device node, we must free the memory allocated in 'omap_dmm' a few lines above. Fixes: 7cb0d6c17b96 ("drm/omap: fix TILER on OMAP5") Signed-off-by: Christophe JAILLET Signed-off-by: Tomi Valkeinen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 51d2967fe5d518cbc17dcbe1db159a6e92eaa615 Author: Yisheng Xie Date: Wed Nov 29 16:11:08 2017 -0800 kmemleak: add scheduling point to kmemleak_scan() [ Upstream commit bde5f6bc68db51128f875a756e9082a6c6ff7b4c ] kmemleak_scan() will scan struct page for each node and it can be really large and resulting in a soft lockup. We have seen a soft lockup when do scan while compile kernel: watchdog: BUG: soft lockup - CPU#53 stuck for 22s! [bash:10287] [...] Call Trace: kmemleak_scan+0x21a/0x4c0 kmemleak_write+0x312/0x350 full_proxy_write+0x5a/0xa0 __vfs_write+0x33/0x150 vfs_write+0xad/0x1a0 SyS_write+0x52/0xc0 do_syscall_64+0x61/0x1a0 entry_SYSCALL64_slow_path+0x25/0x25 Fix this by adding cond_resched every MAX_SCAN_SIZE. Link: http://lkml.kernel.org/r/1511439788-20099-1-git-send-email-xieyisheng1@huawei.com Signed-off-by: Yisheng Xie Suggested-by: Catalin Marinas Acked-by: Catalin Marinas Cc: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit ff8417176a69482e40f30036b4e9eb07360ec759 Author: Trond Myklebust Date: Fri Nov 24 12:00:24 2017 -0500 SUNRPC: Allow connect to return EHOSTUNREACH [ Upstream commit 4ba161a793d5f43757c35feff258d9f20a082940 ] Reported-by: Dmitry Vyukov Signed-off-by: Trond Myklebust Tested-by: Dmitry Vyukov Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit cbfe0c04cef3c379e71d6c1f3fe30aacef1a1ba2 Author: Tetsuo Handa Date: Wed Nov 29 22:34:50 2017 +0900 quota: Check for register_shrinker() failure. [ Upstream commit 88bc0ede8d35edc969350852894dc864a2dc1859 ] register_shrinker() might return -ENOMEM error since Linux 3.12. Call panic() as with other failure checks in this function if register_shrinker() failed. Fixes: 1d3d4437eae1 ("vmscan: per-node deferred work") Signed-off-by: Tetsuo Handa Cc: Jan Kara Cc: Michal Hocko Reviewed-by: Michal Hocko Signed-off-by: Jan Kara Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 5e7bd57ace5029df81267976bd83015dd88df1f1 Author: Geert Uytterhoeven Date: Wed Nov 29 11:01:09 2017 +0100 net: ethernet: xilinx: Mark XILINX_LL_TEMAC broken on 64-bit [ Upstream commit 15bfe05c8d6386f1a90e9340d15336e85e32aad6 ] On 64-bit (e.g. powerpc64/allmodconfig): drivers/net/ethernet/xilinx/ll_temac_main.c: In function 'temac_start_xmit_done': drivers/net/ethernet/xilinx/ll_temac_main.c:633:22: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] dev_kfree_skb_irq((struct sk_buff *)cur_p->app4); ^ cdmac_bd.app4 is u32, so it is too small to hold a kernel pointer. Note that several other fields in struct cdmac_bd are also too small to hold physical addresses on 64-bit platforms. Signed-off-by: Geert Uytterhoeven Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 8de0ae8c8bc37e51e2e46ec13145bc8b3f1efe8f Author: Robert Lippert Date: Mon Nov 27 15:51:55 2017 -0800 hwmon: (pmbus) Use 64bit math for DIRECT format values [ Upstream commit bd467e4eababe4c04272c1e646f066db02734c79 ] Power values in the 100s of watt range can easily blow past 32bit math limits when processing everything in microwatts. Use 64bit math instead to avoid these issues on common 32bit ARM BMC platforms. Fixes: 442aba78728e ("hwmon: PMBus device driver") Signed-off-by: Robert Lippert Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 17375b2735010a400620ca378e4ccd7faafc74e3 Author: Vasily Averin Date: Mon Nov 13 07:25:40 2017 +0300 lockd: fix "list_add double add" caused by legacy signal interface [ Upstream commit 81833de1a46edce9ca20cfe079872ac1c20ef359 ] restart_grace() uses hardcoded init_net. It can cause to "list_add double add" in following scenario: 1) nfsd and lockd was started in several net namespaces 2) nfsd in init_net was stopped (lockd was not stopped because it have users from another net namespaces) 3) lockd got signal, called restart_grace() -> set_grace_period() and enabled lock_manager in hardcoded init_net. 4) nfsd in init_net is started again, its lockd_up() calls set_grace_period() and tries to add lock_manager into init_net 2nd time. Jeff Layton suggest: "Make it safe to call locks_start_grace multiple times on the same lock_manager. If it's already on the global grace_list, then don't try to add it again. (But we don't intentionally add twice, so for now we WARN about that case.) With this change, we also need to ensure that the nfsd4 lock manager initializes the list before we call locks_start_grace. While we're at it, move the rest of the nfsd_net initialization into nfs4_state_create_net. I see no reason to have it spread over two functions like it is today." Suggested patch was updated to generate warning in described situation. Suggested-by: Jeff Layton Signed-off-by: Vasily Averin Signed-off-by: J. Bruce Fields Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit ebd331bed2c9cff8c9874bce07a9397c5d74df24 Author: Andrew Elble Date: Thu Nov 9 13:41:10 2017 -0500 nfsd: check for use of the closed special stateid [ Upstream commit ae254dac721d44c0bfebe2795df87459e2e88219 ] Prevent the use of the closed (invalid) special stateid by clients. Signed-off-by: Andrew Elble Signed-off-by: J. Bruce Fields Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 21db5da6ba10006722a64be9dc679c460b44b87a Author: Vasily Averin Date: Mon Nov 6 16:22:48 2017 +0300 grace: replace BUG_ON by WARN_ONCE in exit_net hook [ Upstream commit b872285751c1af010e12d02bce7069e2061a58ca ] Signed-off-by: Vasily Averin Signed-off-by: J. Bruce Fields Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 19e1d83bbb79586178f2cde6f5ab3f788433a703 Author: Trond Myklebust Date: Fri Nov 3 08:00:15 2017 -0400 nfsd: Ensure we check stateid validity in the seqid operation checks [ Upstream commit 9271d7e509c1bfc0b9a418caec29ec8d1ac38270 ] After taking the stateid st_mutex, we want to know that the stateid still represents valid state before performing any non-idempotent actions. Signed-off-by: Trond Myklebust Signed-off-by: J. Bruce Fields Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 12a48b3605b80a3f4c143a83b88e4e922eb4a2e0 Author: Trond Myklebust Date: Fri Nov 3 08:00:12 2017 -0400 nfsd: CLOSE SHOULD return the invalid special stateid for NFSv4.x (x>0) [ Upstream commit fb500a7cfee7f2f447d2bbf30cb59629feab6ac1 ] Signed-off-by: Trond Myklebust Signed-off-by: J. Bruce Fields Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 49f1a164d4310a9586f4dbc142a9fdc001b44434 Author: Eduardo Otubo Date: Thu Nov 23 15:18:35 2017 +0100 xen-netfront: remove warning when unloading module [ Upstream commit 5b5971df3bc2775107ddad164018a8a8db633b81 ] v2: * Replace busy wait with wait_event()/wake_up_all() * Cannot garantee that at the time xennet_remove is called, the xen_netback state will not be XenbusStateClosed, so added a condition for that * There's a small chance for the xen_netback state is XenbusStateUnknown by the time the xen_netfront switches to Closed, so added a condition for that. When unloading module xen_netfront from guest, dmesg would output warning messages like below: [ 105.236836] xen:grant_table: WARNING: g.e. 0x903 still in use! [ 105.236839] deferring g.e. 0x903 (pfn 0x35805) This problem relies on netfront and netback being out of sync. By the time netfront revokes the g.e.'s netback didn't have enough time to free all of them, hence displaying the warnings on dmesg. The trick here is to make netfront to wait until netback frees all the g.e.'s and only then continue to cleanup for the module removal, and this is done by manipulating both device states. Signed-off-by: Eduardo Otubo Acked-by: Juergen Gross Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit fe7832ffea9ab8c579b4bd94f3529380dbb3f6e6 Author: Wanpeng Li Date: Mon Nov 20 14:52:21 2017 -0800 KVM: VMX: Fix rflags cache during vCPU reset [ Upstream commit c37c28730bb031cc8a44a130c2555c0f3efbe2d0 ] Reported by syzkaller: *** Guest State *** CR0: actual=0x0000000080010031, shadow=0x0000000060000010, gh_mask=fffffffffffffff7 CR4: actual=0x0000000000002061, shadow=0x0000000000000000, gh_mask=ffffffffffffe8f1 CR3 = 0x000000002081e000 RSP = 0x000000000000fffa RIP = 0x0000000000000000 RFLAGS=0x00023000 DR7 = 0x00000000000000 ^^^^^^^^^^ ------------[ cut here ]------------ WARNING: CPU: 6 PID: 24431 at /home/kernel/linux/arch/x86/kvm//x86.c:7302 kvm_arch_vcpu_ioctl_run+0x651/0x2ea0 [kvm] CPU: 6 PID: 24431 Comm: reprotest Tainted: G W OE 4.14.0+ #26 RIP: 0010:kvm_arch_vcpu_ioctl_run+0x651/0x2ea0 [kvm] RSP: 0018:ffff880291d179e0 EFLAGS: 00010202 Call Trace: kvm_vcpu_ioctl+0x479/0x880 [kvm] do_vfs_ioctl+0x142/0x9a0 SyS_ioctl+0x74/0x80 entry_SYSCALL_64_fastpath+0x23/0x9a The failed vmentry is triggered by the following beautified testcase: #include #include #include #include #include #include #include long r[5]; int main() { struct kvm_debugregs dr = { 0 }; r[2] = open("/dev/kvm", O_RDONLY); r[3] = ioctl(r[2], KVM_CREATE_VM, 0); r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7); struct kvm_guest_debug debug = { .control = 0xf0403, .arch = { .debugreg[6] = 0x2, .debugreg[7] = 0x2 } }; ioctl(r[4], KVM_SET_GUEST_DEBUG, &debug); ioctl(r[4], KVM_RUN, 0); } which testcase tries to setup the processor specific debug registers and configure vCPU for handling guest debug events through KVM_SET_GUEST_DEBUG. The KVM_SET_GUEST_DEBUG ioctl will get and set rflags in order to set TF bit if single step is needed. All regs' caches are reset to avail and GUEST_RFLAGS vmcs field is reset to 0x2 during vCPU reset. However, the cache of rflags is not reset during vCPU reset. The function vmx_get_rflags() returns an unreset rflags cache value since the cache is marked avail, it is 0 after boot. Vmentry fails if the rflags reserved bit 1 is 0. This patch fixes it by resetting both the GUEST_RFLAGS vmcs field and its cache to 0x2 during vCPU reset. Reported-by: Dmitry Vyukov Tested-by: Dmitry Vyukov Reviewed-by: David Hildenbrand Cc: Paolo Bonzini Cc: Radim Krčmář Cc: Nadav Amit Cc: Dmitry Vyukov Signed-off-by: Wanpeng Li Signed-off-by: Paolo Bonzini Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit de3d7e13461c5727128ffaa725d254d2c704ba03 Author: Josef Bacik Date: Wed Nov 15 16:20:52 2017 -0500 btrfs: fix deadlock when writing out space cache [ Upstream commit b77000ed558daa3bef0899d29bf171b8c9b5e6a8 ] If we fail to prepare our pages for whatever reason (out of memory in our case) we need to make sure to drop the block_group->data_rwsem, otherwise hilarity ensues. Signed-off-by: Josef Bacik Reviewed-by: Omar Sandoval Reviewed-by: Liu Bo Reviewed-by: David Sterba [ add label and use existing unlocking code ] Signed-off-by: David Sterba Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 4870fb97221d3fd8d8868e26aa4e61f78ebb32b2 Author: Chun-Yeow Yeoh Date: Tue Nov 14 23:20:05 2017 +0800 mac80211: fix the update of path metric for RANN frame [ Upstream commit fbbdad5edf0bb59786a51b94a9d006bc8c2da9a2 ] The previous path metric update from RANN frame has not considered the own link metric toward the transmitting mesh STA. Fix this. Reported-by: Michael65535 Signed-off-by: Chun-Yeow Yeoh Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 5acc065c6b3e389fa5520e1d171c79c7c5c701b8 Author: zhangliping Date: Sat Nov 25 22:02:12 2017 +0800 openvswitch: fix the incorrect flow action alloc size [ Upstream commit 67c8d22a73128ff910e2287567132530abcf5b71 ] If we want to add a datapath flow, which has more than 500 vxlan outputs' action, we will get the following error reports: openvswitch: netlink: Flow action size 32832 bytes exceeds max openvswitch: netlink: Flow action size 32832 bytes exceeds max openvswitch: netlink: Actions may not be safe on all matching packets ... ... It seems that we can simply enlarge the MAX_ACTIONS_BUFSIZE to fix it, but this is not the root cause. For example, for a vxlan output action, we need about 60 bytes for the nlattr, but after it is converted to the flow action, it only occupies 24 bytes. This means that we can still support more than 1000 vxlan output actions for a single datapath flow under the the current 32k max limitation. So even if the nla_len(attr) is larger than MAX_ACTIONS_BUFSIZE, we shouldn't report EINVAL and keep it move on, as the judgement can be done by the reserve_sfa_size. Signed-off-by: zhangliping Acked-by: Pravin B Shelar Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 44ef4f4033dc9eac4a9697ea7e0f1577dfd9ad06 Author: Felix Kuehling Date: Wed Nov 1 19:21:57 2017 -0400 drm/amdkfd: Fix SDMA oversubsription handling [ Upstream commit 8c946b8988acec785bcf67088b6bd0747f36d2d3 ] SDMA only supports a fixed number of queues. HWS cannot handle oversubscription. Signed-off-by: shaoyun liu Signed-off-by: Felix Kuehling Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit a50f2e242887ad0b0feb62df79cd05f7943c709e Author: shaoyunl Date: Wed Nov 1 19:21:56 2017 -0400 drm/amdkfd: Fix SDMA ring buffer size calculation [ Upstream commit d12fb13f23199faa7e536acec1db49068e5a067d ] ffs function return the position of the first bit set on 1 based. (bit zero returns 1). Signed-off-by: shaoyun liu Signed-off-by: Felix Kuehling Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 206fa7b19cb266575bb7c100723d7c060c1bd886 Author: Felix Kuehling Date: Wed Nov 1 19:21:55 2017 -0400 drm/amdgpu: Fix SDMA load/unload sequence on HWS disabled mode [ Upstream commit cf21654b40968609779751b34e7923180968fe5b ] Fix the SDMA load and unload sequence as suggested by HW document. Signed-off-by: shaoyun liu Signed-off-by: Felix Kuehling Acked-by: Oded Gabbay Signed-off-by: Oded Gabbay Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 1f9bfbe7016b4a772bb6b47f8209ec76f6fad57d Author: Michael Lyle Date: Fri Nov 24 15:14:27 2017 -0800 bcache: check return value of register_shrinker [ Upstream commit 6c4ca1e36cdc1a0a7a84797804b87920ccbebf51 ] register_shrinker is now __must_check, so check it to kill a warning. Caller of bch_btree_cache_alloc in super.c appropriately checks return value so this is fully plumbed through. This V2 fixes checkpatch warnings and improves the commit description, as I was too hasty getting the previous version out. Signed-off-by: Michael Lyle Reviewed-by: Vojtech Pavlik Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 5fb21a653095dfc913eb82868143a95b5366f0c1 Author: James Hogan Date: Wed Nov 15 21:17:55 2017 +0000 cpufreq: Add Loongson machine dependencies [ Upstream commit 0d307935fefa6389eb726c6362351c162c949101 ] The MIPS loongson cpufreq drivers don't build unless configured for the correct machine type, due to dependency on machine specific architecture headers and symbols in machine specific platform code. More specifically loongson1-cpufreq.c uses RST_CPU_EN and RST_CPU, neither of which is defined in asm/mach-loongson32/regs-clk.h unless CONFIG_LOONGSON1_LS1B=y, and loongson2_cpufreq.c references loongson2_clockmod_table[], which is only defined in arch/mips/loongson64/lemote-2f/clock.c, i.e. when CONFIG_LEMOTE_MACH2F=y. Add these dependencies to Kconfig to avoid randconfig / allyesconfig build failures (e.g. when based on BMIPS which also has a cpufreq driver). Signed-off-by: James Hogan Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 0deb9532cafb37a0775e8e853fca0272eb2bee0f Author: Hans de Goede Date: Sun Oct 15 21:24:49 2017 +0200 ACPI / bus: Leave modalias empty for devices which are not present [ Upstream commit 10809bb976648ac58194a629e3d7af99e7400297 ] Most Bay and Cherry Trail devices use a generic DSDT with all possible peripheral devices present in the DSDT, with their _STA returning 0x00 or 0x0f based on AML variables which describe what is actually present on the board. Since ACPI device objects with a 0x00 status (not present) still get an entry under /sys/bus/acpi/devices, and those entry had an acpi:PNPID modalias, userspace would end up loading modules for non present hardware. This commit fixes this by leaving the modalias empty for non present devices. This results in 10 modules less being loaded with a generic distro kernel config on my Cherry Trail test-device (a GPD pocket). Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 77e1eb750f4172f0718a6d770798b0ab9eeeb8d6 Author: Nikita Leshenko Date: Sun Nov 5 15:52:33 2017 +0200 KVM: x86: ioapic: Preserve read-only values in the redirection table [ Upstream commit b200dded0a6974a3b69599832b2203483920ab25 ] According to 82093AA (IOAPIC) manual, Remote IRR and Delivery Status are read-only. QEMU implements the bits as RO in commit 479c2a1cb7fb ("ioapic: keep RO bits for IOAPIC entry"). Signed-off-by: Nikita Leshenko Reviewed-by: Liran Alon Signed-off-by: Konrad Rzeszutek Wilk Reviewed-by: Wanpeng Li Reviewed-by: Steve Rutherford Signed-off-by: Radim Krčmář Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 3ee7ae2bb537e54d3f6ce7120c5cc39957bec930 Author: Nikita Leshenko Date: Sun Nov 5 15:52:32 2017 +0200 KVM: x86: ioapic: Clear Remote IRR when entry is switched to edge-triggered [ Upstream commit a8bfec2930525808c01f038825d1df3904638631 ] Some OSes (Linux, Xen) use this behavior to clear the Remote IRR bit for IOAPICs without an EOI register. They simulate the EOI message manually by changing the trigger mode to edge and then back to level, with the entry being masked during this. QEMU implements this feature in commit ed1263c363c9 ("ioapic: clear remote irr bit for edge-triggered interrupts") As a side effect, this commit removes an incorrect behavior where Remote IRR was cleared when the redirection table entry was rewritten. This is not consistent with the manual and also opens an opportunity for a strange behavior when a redirection table entry is modified from an interrupt handler that handles the same entry: The modification will clear the Remote IRR bit even though the interrupt handler is still running. Signed-off-by: Nikita Leshenko Reviewed-by: Liran Alon Signed-off-by: Konrad Rzeszutek Wilk Reviewed-by: Wanpeng Li Reviewed-by: Steve Rutherford Signed-off-by: Radim Krčmář Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 19a2c007214931808cbeae3ceb673233e57ed4f9 Author: Nikita Leshenko Date: Sun Nov 5 15:52:29 2017 +0200 KVM: x86: ioapic: Fix level-triggered EOI and IOAPIC reconfigure race [ Upstream commit 0fc5a36dd6b345eb0d251a65c236e53bead3eef7 ] KVM uses ioapic_handled_vectors to track vectors that need to notify the IOAPIC on EOI. The problem is that IOAPIC can be reconfigured while an interrupt with old configuration is pending or running and ioapic_handled_vectors only remembers the newest configuration; thus EOI from the old interrupt is not delievered to the IOAPIC. A previous commit db2bdcbbbd32 ("KVM: x86: fix edge EOI and IOAPIC reconfig race") addressed this issue by adding pending edge-triggered interrupts to ioapic_handled_vectors, fixing this race for edge-triggered interrupts. The commit explicitly ignored level-triggered interrupts, but this race applies to them as well: 1) IOAPIC sends a level triggered interrupt vector to VCPU0 2) VCPU0's handler deasserts the irq line and reconfigures the IOAPIC to route the vector to VCPU1. The reconfiguration rewrites only the upper 32 bits of the IOREDTBLn register. (Causes KVM to update ioapic_handled_vectors for VCPU0 and it no longer includes the vector.) 3) VCPU0 sends EOI for the vector, but it's not delievered to the IOAPIC because the ioapic_handled_vectors doesn't include the vector. 4) New interrupts are not delievered to VCPU1 because remote_irr bit is set forever. Therefore, the correct behavior is to add all pending and running interrupts to ioapic_handled_vectors. This commit introduces a slight performance hit similar to commit db2bdcbbbd32 ("KVM: x86: fix edge EOI and IOAPIC reconfig race") for the rare case that the vector is reused by a non-IOAPIC source on VCPU0. We prefer to keep solution simple and not handle this case just as the original commit does. Fixes: db2bdcbbbd32 ("KVM: x86: fix edge EOI and IOAPIC reconfig race") Signed-off-by: Nikita Leshenko Reviewed-by: Liran Alon Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Radim Krčmář Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 3bad2ece682151144b014bd18506d44acf6c21e4 Author: Wanpeng Li Date: Sun Nov 5 16:54:47 2017 -0800 KVM: X86: Fix operand/address-size during instruction decoding [ Upstream commit 3853be2603191829b442b64dac6ae8ba0c027bf9 ] Pedro reported: During tests that we conducted on KVM, we noticed that executing a "PUSH %ES" instruction under KVM produces different results on both memory and the SP register depending on whether EPT support is enabled. With EPT the SP is reduced by 4 bytes (and the written value is 0-padded) but without EPT support it is only reduced by 2 bytes. The difference can be observed when the CS.DB field is 1 (32-bit) but not when it's 0 (16-bit). The internal segment descriptor cache exist even in real/vm8096 mode. The CS.D also should be respected instead of just default operand/address-size/66H prefix/67H prefix during instruction decoding. This patch fixes it by also adjusting operand/address-size according to CS.D. Reported-by: Pedro Fonseca Tested-by: Pedro Fonseca Cc: Paolo Bonzini Cc: Radim Krčmář Cc: Nadav Amit Cc: Pedro Fonseca Signed-off-by: Wanpeng Li Reviewed-by: Paolo Bonzini Signed-off-by: Radim Krčmář Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 80d2b5af21d2a29abfd58d378195a446dbc3ae43 Author: Liran Alon Date: Sun Nov 5 16:56:34 2017 +0200 KVM: x86: Don't re-execute instruction when not passing CR2 value [ Upstream commit 9b8ae63798cb97e785a667ff27e43fa6220cb734 ] In case of instruction-decode failure or emulation failure, x86_emulate_instruction() will call reexecute_instruction() which will attempt to use the cr2 value passed to x86_emulate_instruction(). However, when x86_emulate_instruction() is called from emulate_instruction(), cr2 is not passed (passed as 0) and therefore it doesn't make sense to execute reexecute_instruction() logic at all. Fixes: 51d8b66199e9 ("KVM: cleanup emulate_instruction") Signed-off-by: Liran Alon Reviewed-by: Nikita Leshenko Reviewed-by: Konrad Rzeszutek Wilk Signed-off-by: Konrad Rzeszutek Wilk Reviewed-by: Wanpeng Li Signed-off-by: Radim Krčmář Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 3d4df917d67191bca18aec35b9d1065d718fc39c Author: Liran Alon Date: Sun Nov 5 16:56:33 2017 +0200 KVM: x86: emulator: Return to user-mode on L1 CPL=0 emulation failure [ Upstream commit 1f4dcb3b213235e642088709a1c54964d23365e9 ] On this case, handle_emulation_failure() fills kvm_run with internal-error information which it expects to be delivered to user-mode for further processing. However, the code reports a wrong return-value which makes KVM to never return to user-mode on this scenario. Fixes: 6d77dbfc88e3 ("KVM: inject #UD if instruction emulation fails and exit to userspace") Signed-off-by: Liran Alon Reviewed-by: Nikita Leshenko Reviewed-by: Konrad Rzeszutek Wilk Signed-off-by: Konrad Rzeszutek Wilk Reviewed-by: Wanpeng Li Signed-off-by: Radim Krčmář Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 2b84fd62aa402f83fafb1f5bcc014cc135bdcf69 Author: Lyude Paul Date: Tue Dec 12 14:31:30 2017 -0500 igb: Free IRQs when device is hotplugged commit 888f22931478a05bc81ceb7295c626e1292bf0ed upstream. Recently I got a Caldigit TS3 Thunderbolt 3 dock, and noticed that upon hotplugging my kernel would immediately crash due to igb: [ 680.825801] kernel BUG at drivers/pci/msi.c:352! [ 680.828388] invalid opcode: 0000 [#1] SMP [ 680.829194] Modules linked in: igb(O) thunderbolt i2c_algo_bit joydev vfat fat btusb btrtl btbcm btintel bluetooth ecdh_generic hp_wmi sparse_keymap rfkill wmi_bmof iTCO_wdt intel_rapl x86_pkg_temp_thermal coretemp crc32_pclmul snd_pcm rtsx_pci_ms mei_me snd_timer memstick snd pcspkr mei soundcore i2c_i801 tpm_tis psmouse shpchp wmi tpm_tis_core tpm video hp_wireless acpi_pad rtsx_pci_sdmmc mmc_core crc32c_intel serio_raw rtsx_pci mfd_core xhci_pci xhci_hcd i2c_hid i2c_core [last unloaded: igb] [ 680.831085] CPU: 1 PID: 78 Comm: kworker/u16:1 Tainted: G O 4.15.0-rc3Lyude-Test+ #6 [ 680.831596] Hardware name: HP HP ZBook Studio G4/826B, BIOS P71 Ver. 01.03 06/09/2017 [ 680.832168] Workqueue: kacpi_hotplug acpi_hotplug_work_fn [ 680.832687] RIP: 0010:free_msi_irqs+0x180/0x1b0 [ 680.833271] RSP: 0018:ffffc9000030fbf0 EFLAGS: 00010286 [ 680.833761] RAX: ffff8803405f9c00 RBX: ffff88033e3d2e40 RCX: 000000000000002c [ 680.834278] RDX: 0000000000000000 RSI: 00000000000000ac RDI: ffff880340be2178 [ 680.834832] RBP: 0000000000000000 R08: ffff880340be1ff0 R09: ffff8803405f9c00 [ 680.835342] R10: 0000000000000000 R11: 0000000000000040 R12: ffff88033d63a298 [ 680.835822] R13: ffff88033d63a000 R14: 0000000000000060 R15: ffff880341959000 [ 680.836332] FS: 0000000000000000(0000) GS:ffff88034f440000(0000) knlGS:0000000000000000 [ 680.836817] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 680.837360] CR2: 000055e64044afdf CR3: 0000000001c09002 CR4: 00000000003606e0 [ 680.837954] Call Trace: [ 680.838853] pci_disable_msix+0xce/0xf0 [ 680.839616] igb_reset_interrupt_capability+0x5d/0x60 [igb] [ 680.840278] igb_remove+0x9d/0x110 [igb] [ 680.840764] pci_device_remove+0x36/0xb0 [ 680.841279] device_release_driver_internal+0x157/0x220 [ 680.841739] pci_stop_bus_device+0x7d/0xa0 [ 680.842255] pci_stop_bus_device+0x2b/0xa0 [ 680.842722] pci_stop_bus_device+0x3d/0xa0 [ 680.843189] pci_stop_and_remove_bus_device+0xe/0x20 [ 680.843627] trim_stale_devices+0xf3/0x140 [ 680.844086] trim_stale_devices+0x94/0x140 [ 680.844532] trim_stale_devices+0xa6/0x140 [ 680.845031] ? get_slot_status+0x90/0xc0 [ 680.845536] acpiphp_check_bridge.part.5+0xfe/0x140 [ 680.846021] acpiphp_hotplug_notify+0x175/0x200 [ 680.846581] ? free_bridge+0x100/0x100 [ 680.847113] acpi_device_hotplug+0x8a/0x490 [ 680.847535] acpi_hotplug_work_fn+0x1a/0x30 [ 680.848076] process_one_work+0x182/0x3a0 [ 680.848543] worker_thread+0x2e/0x380 [ 680.848963] ? process_one_work+0x3a0/0x3a0 [ 680.849373] kthread+0x111/0x130 [ 680.849776] ? kthread_create_worker_on_cpu+0x50/0x50 [ 680.850188] ret_from_fork+0x1f/0x30 [ 680.850601] Code: 43 14 85 c0 0f 84 d5 fe ff ff 31 ed eb 0f 83 c5 01 39 6b 14 0f 86 c5 fe ff ff 8b 7b 10 01 ef e8 b7 e4 d2 ff 48 83 78 70 00 74 e3 <0f> 0b 49 8d b5 a0 00 00 00 e8 62 6f d3 ff e9 c7 fe ff ff 48 8b [ 680.851497] RIP: free_msi_irqs+0x180/0x1b0 RSP: ffffc9000030fbf0 As it turns out, normally the freeing of IRQs that would fix this is called inside of the scope of __igb_close(). However, since the device is already gone by the point we try to unregister the netdevice from the driver due to a hotplug we end up seeing that the netif isn't present and thus, forget to free any of the device IRQs. So: make sure that if we're in the process of dismantling the netdev, we always allow __igb_close() to be called so that IRQs may be freed normally. Additionally, only allow igb_close() to be called from __igb_close() if it hasn't already been called for the given adapter. Signed-off-by: Lyude Paul Fixes: 9474933caf21 ("igb: close/suspend race in netif_device_detach") Cc: Todd Fujinaka Cc: Stephen Hemminger Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: Greg Kroah-Hartman commit f42132c9610fa22b8377c4636b2e39664293fd66 Author: Jesse Chan Date: Mon Nov 20 12:57:13 2017 -0800 mtd: nand: denali_pci: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE commit d822401d1c6898a4a4ee03977b78b8cec402e88a upstream. This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/mtd/nand/denali_pci.o see include/linux/module.h for more information This adds the license as "GPL v2", which matches the header of the file. MODULE_DESCRIPTION and MODULE_AUTHOR are also added. Signed-off-by: Jesse Chan Acked-by: Masahiro Yamada Signed-off-by: Boris Brezillon Signed-off-by: Greg Kroah-Hartman commit 40ac08f609145800e1062b24e712f2e1e673f6e4 Author: Jesse Chan Date: Mon Nov 20 12:54:26 2017 -0800 gpio: ath79: add missing MODULE_DESCRIPTION/LICENSE commit 539340f37e6d6ed4cd93e8e18c9b2e4eafd4b842 upstream. This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/gpio/gpio-ath79.o see include/linux/module.h for more information This adds the license as "GPL v2", which matches the header of the file. MODULE_DESCRIPTION is also added. Signed-off-by: Jesse Chan Acked-by: Alban Bedel Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman commit 35831adf13e869d1b6eceb923229621d55053c3d Author: Jesse Chan Date: Mon Nov 20 12:54:52 2017 -0800 gpio: iop: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE commit 97b03136e1b637d7a9d2274c099e44ecf23f1103 upstream. This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/gpio/gpio-iop.o see include/linux/module.h for more information This adds the license as "GPL", which matches the header of the file. MODULE_DESCRIPTION and MODULE_AUTHOR are also added. Signed-off-by: Jesse Chan Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman commit 3f19b9ea13f49aed67192e768f207b7ecbd2cb1f Author: Jesse Chan Date: Mon Nov 20 12:58:27 2017 -0800 power: reset: zx-reboot: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE commit 348c7cf5fcbcb68838255759d4cb45d039af36d2 upstream. This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/power/reset/zx-reboot.o see include/linux/module.h for more information This adds the license as "GPL v2", which matches the header of the file. MODULE_DESCRIPTION and MODULE_AUTHOR are also added. Signed-off-by: Jesse Chan Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman commit fba245f4c6351b1d25dd4594f0a092bb7a78cf12 Author: Stephan Mueller Date: Tue Jan 2 08:55:25 2018 +0100 crypto: af_alg - whitelist mask and type commit bb30b8848c85e18ca7e371d0a869e94b3e383bdf upstream. The user space interface allows specifying the type and mask field used to allocate the cipher. Only a subset of the possible flags are intended for user space. Therefore, white-list the allowed flags. In case the user space caller uses at least one non-allowed flag, EINVAL is returned. Reported-by: syzbot Signed-off-by: Stephan Mueller Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit 0b69d7f4b5fc1ac0cf49a21139a1384e6d0c934f Author: Stephan Mueller Date: Thu Jan 18 20:41:09 2018 +0100 crypto: aesni - handle zero length dst buffer commit 9c674e1e2f9e24fa4392167efe343749008338e0 upstream. GCM can be invoked with a zero destination buffer. This is possible if the AAD and the ciphertext have zero lengths and only the tag exists in the source buffer (i.e. a source buffer cannot be zero). In this case, the GCM cipher only performs the authentication and no decryption operation. When the destination buffer has zero length, it is possible that no page is mapped to the SG pointing to the destination. In this case, sg_page(req->dst) is an invalid access. Therefore, page accesses should only be allowed if the req->dst->length is non-zero which is the indicator that a page must exist. This fixes a crash that can be triggered by user space via AF_ALG. Signed-off-by: Stephan Mueller Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit 623e5c8ae32b39cc8baea83478695dc624935318 Author: Takashi Iwai Date: Tue Jan 9 23:11:03 2018 +0100 ALSA: seq: Make ioctls race-free commit b3defb791b26ea0683a93a4f49c77ec45ec96f10 upstream. The ALSA sequencer ioctls have no protection against racy calls while the concurrent operations may lead to interfere with each other. As reported recently, for example, the concurrent calls of setting client pool with a combination of write calls may lead to either the unkillable dead-lock or UAF. As a slightly big hammer solution, this patch introduces the mutex to make each ioctl exclusive. Although this may reduce performance via parallel ioctl calls, usually it's not demanded for sequencer usages, hence it should be negligible. Reported-by: Luo Quan Reviewed-by: Kees Cook Reviewed-by: Greg Kroah-Hartman Signed-off-by: Takashi Iwai [bwh: Backported to 4.4: ioctl dispatch is done from snd_seq_do_ioctl(); take the mutex and add ret variable there.] Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman commit 145ebf95fb346528dd276c3e23324609e5f4d3f6 Author: Hugh Dickins Date: Mon Jan 29 18:15:33 2018 -0800 kaiser: fix intel_bts perf crashes Vince reported perf_fuzzer quickly locks up on 4.15-rc7 with PTI; Robert reported Bad RIP with KPTI and Intel BTS also on 4.15-rc7: honggfuzz -f /tmp/somedirectorywithatleastonefile \ --linux_perf_bts_edge -s -- /bin/true (honggfuzz from https://github.com/google/honggfuzz) crashed with BUG: unable to handle kernel paging request at ffff9d3215100000 (then narrowed it down to perf record --per-thread -e intel_bts//u -- /bin/ls). The intel_bts driver does not use the 'normal' BTS buffer which is exposed through kaiser_add_mapping(), but instead uses the memory allocated for the perf AUX buffer. This obviously comes apart when using PTI, because then the kernel mapping, which includes that AUX buffer memory, disappears while switched to user page tables. Easily fixed in old-Kaiser backports, by applying kaiser_add_mapping() to those pages; perhaps not so easy for upstream, where 4.15-rc8 commit 99a9dc98ba52 ("x86,perf: Disable intel_bts when PTI") disables for now. Slightly reorganized surrounding code in bts_buffer_setup_aux(), so it can better match bts_buffer_free_aux(): free_aux with an #ifdef to avoid the loop when PTI is off, but setup_aux needs to loop anyway (and kaiser_add_mapping() is cheap when PTI config is off or "pti=off"). Reported-by: Vince Weaver Reported-by: Robert Święcki Analyzed-by: Peter Zijlstra Analyzed-by: Stephane Eranian Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Andy Lutomirski Cc: Alexander Shishkin Cc: Linus Torvalds Cc: Vince Weaver Cc: stable@vger.kernel.org Cc: Jiri Kosina Signed-off-by: Hugh Dickins Signed-off-by: Greg Kroah-Hartman commit 5991ee90a270537a8a04751f0097b82274ebc177 Author: Dave Hansen Date: Wed Jan 10 14:49:39 2018 -0800 x86/pti: Make unpoison of pgd for trusted boot work for real commit 445b69e3b75e42362a5bdc13c8b8f61599e2228a upstream. The inital fix for trusted boot and PTI potentially misses the pgd clearing if pud_alloc() sets a PGD. It probably works in *practice* because for two adjacent calls to map_tboot_page() that share a PGD entry, the first will clear NX, *then* allocate and set the PGD (without NX clear). The second call will *not* allocate but will clear the NX bit. Defer the NX clearing to a point after it is known that all top-level allocations have occurred. Add a comment to clarify why. [ tglx: Massaged changelog ] [hughd notes: I have not tested tboot, but this looks to me as necessary and as safe in old-Kaiser backports as it is upstream; I'm not submitting the commit-to-be-fixed 262b6b30087, since it was undone by 445b69e3b75e, and makes conflict trouble because of 5-level's p4d versus 4-level's pgd.] Fixes: 262b6b30087 ("x86/tboot: Unbreak tboot with PTI enabled") Signed-off-by: Dave Hansen Signed-off-by: Thomas Gleixner Reviewed-by: Andrea Arcangeli Cc: Jon Masters Cc: "Tim Chen" Cc: gnomes@lxorguk.ukuu.org.uk Cc: peterz@infradead.org Cc: ning.sun@intel.com Cc: tboot-devel@lists.sourceforge.net Cc: andi@firstfloor.org Cc: luto@kernel.org Cc: law@redhat.com Cc: pbonzini@redhat.com Cc: torvalds@linux-foundation.org Cc: gregkh@linux-foundation.org Cc: dwmw@amazon.co.uk Cc: nickc@redhat.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180110224939.2695CD47@viggo.jf.intel.com Signed-off-by: Hugh Dickins Signed-off-by: Greg Kroah-Hartman commit faa74a862a9442233bff39a496013a74775fb660 Author: Daniel Borkmann Date: Tue Jan 30 03:37:46 2018 +0100 bpf: reject stores into ctx via st and xadd [ upstream commit f37a8cb84cce18762e8f86a70bd6a49a66ab964c ] Alexei found that verifier does not reject stores into context via BPF_ST instead of BPF_STX. And while looking at it, we also should not allow XADD variant of BPF_STX. The context rewriter is only assuming either BPF_LDX_MEM- or BPF_STX_MEM-type operations, thus reject anything other than that so that assumptions in the rewriter properly hold. Add test cases as well for BPF selftests. Fixes: d691f9e8d440 ("bpf: allow programs to write to certain skb fields") Reported-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann Signed-off-by: Alexei Starovoitov Signed-off-by: Greg Kroah-Hartman commit 02662601a231f8721930168ce71d84bcfb8d9a96 Author: Alexei Starovoitov Date: Tue Jan 30 03:37:45 2018 +0100 bpf: fix 32-bit divide by zero [ upstream commit 68fda450a7df51cff9e5a4d4a4d9d0d5f2589153 ] due to some JITs doing if (src_reg == 0) check in 64-bit mode for div/mod operations mask upper 32-bits of src register before doing the check Fixes: 622582786c9e ("net: filter: x86: internal BPF JIT") Fixes: 7a12b5031c6b ("sparc64: Add eBPF JIT.") Reported-by: syzbot+48340bb518e88849e2e3@syzkaller.appspotmail.com Signed-off-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann Signed-off-by: Greg Kroah-Hartman commit b72ba2a0d82447538c7c977ccb3f2b31b19b7767 Author: Eric Dumazet Date: Tue Jan 30 03:37:44 2018 +0100 bpf: fix divides by zero [ upstream commit c366287ebd698ef5e3de300d90cd62ee9ee7373e ] Divides by zero are not nice, lets avoid them if possible. Also do_div() seems not needed when dealing with 32bit operands, but this seems a minor detail. Fixes: bd4cf0ed331a ("net: filter: rework/optimize internal BPF interpreter's instruction set") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: Alexei Starovoitov Signed-off-by: Greg Kroah-Hartman commit 96d9b2338bed553c37f759127d8d18c857449ceb Author: Daniel Borkmann Date: Tue Jan 30 03:37:43 2018 +0100 bpf: avoid false sharing of map refcount with max_entries [ upstream commit be95a845cc4402272994ce290e3ad928aff06cb9 ] In addition to commit b2157399cc98 ("bpf: prevent out-of-bounds speculation") also change the layout of struct bpf_map such that false sharing of fast-path members like max_entries is avoided when the maps reference counter is altered. Therefore enforce them to be placed into separate cachelines. pahole dump after change: struct bpf_map { const struct bpf_map_ops * ops; /* 0 8 */ struct bpf_map * inner_map_meta; /* 8 8 */ void * security; /* 16 8 */ enum bpf_map_type map_type; /* 24 4 */ u32 key_size; /* 28 4 */ u32 value_size; /* 32 4 */ u32 max_entries; /* 36 4 */ u32 map_flags; /* 40 4 */ u32 pages; /* 44 4 */ u32 id; /* 48 4 */ int numa_node; /* 52 4 */ bool unpriv_array; /* 56 1 */ /* XXX 7 bytes hole, try to pack */ /* --- cacheline 1 boundary (64 bytes) --- */ struct user_struct * user; /* 64 8 */ atomic_t refcnt; /* 72 4 */ atomic_t usercnt; /* 76 4 */ struct work_struct work; /* 80 32 */ char name[16]; /* 112 16 */ /* --- cacheline 2 boundary (128 bytes) --- */ /* size: 128, cachelines: 2, members: 17 */ /* sum members: 121, holes: 1, sum holes: 7 */ }; Now all entries in the first cacheline are read only throughout the life time of the map, set up once during map creation. Overall struct size and number of cachelines doesn't change from the reordering. struct bpf_map is usually first member and embedded in map structs in specific map implementations, so also avoid those members to sit at the end where it could potentially share the cacheline with first map values e.g. in the array since remote CPUs could trigger map updates just as well for those (easily dirtying members like max_entries intentionally as well) while having subsequent values in cache. Quoting from Google's Project Zero blog [1]: Additionally, at least on the Intel machine on which this was tested, bouncing modified cache lines between cores is slow, apparently because the MESI protocol is used for cache coherence [8]. Changing the reference counter of an eBPF array on one physical CPU core causes the cache line containing the reference counter to be bounced over to that CPU core, making reads of the reference counter on all other CPU cores slow until the changed reference counter has been written back to memory. Because the length and the reference counter of an eBPF array are stored in the same cache line, this also means that changing the reference counter on one physical CPU core causes reads of the eBPF array's length to be slow on other physical CPU cores (intentional false sharing). While this doesn't 'control' the out-of-bounds speculation through masking the index as in commit b2157399cc98, triggering a manipulation of the map's reference counter is really trivial, so lets not allow to easily affect max_entries from it. Splitting to separate cachelines also generally makes sense from a performance perspective anyway in that fast-path won't have a cache miss if the map gets pinned, reused in other progs, etc out of control path, thus also avoids unintentional false sharing. [1] https://googleprojectzero.blogspot.ch/2018/01/reading-privileged-memory-with-side.html Signed-off-by: Daniel Borkmann Signed-off-by: Alexei Starovoitov Signed-off-by: Greg Kroah-Hartman commit 7dcda40e52ff0712a2d7d5353c1722cb1f994330 Author: Daniel Borkmann Date: Tue Jan 30 03:37:42 2018 +0100 bpf: arsh is not supported in 32 bit alu thus reject it [ upstream commit 7891a87efc7116590eaba57acc3c422487802c6f ] The following snippet was throwing an 'unknown opcode cc' warning in BPF interpreter: 0: (18) r0 = 0x0 2: (7b) *(u64 *)(r10 -16) = r0 3: (cc) (u32) r0 s>>= (u32) r0 4: (95) exit Although a number of JITs do support BPF_ALU | BPF_ARSH | BPF_{K,X} generation, not all of them do and interpreter does neither. We can leave existing ones and implement it later in bpf-next for the remaining ones, but reject this properly in verifier for the time being. Fixes: 17a5267067f3 ("bpf: verifier (add verifier core)") Reported-by: syzbot+93c4904c5c70348a6890@syzkaller.appspotmail.com Signed-off-by: Daniel Borkmann Signed-off-by: Alexei Starovoitov Signed-off-by: Greg Kroah-Hartman commit 28c486744e6de4d882a1d853aa63d99fcba4b7a6 Author: Alexei Starovoitov Date: Tue Jan 30 03:37:41 2018 +0100 bpf: introduce BPF_JIT_ALWAYS_ON config [ upstream commit 290af86629b25ffd1ed6232c4e9107da031705cb ] The BPF interpreter has been used as part of the spectre 2 attack CVE-2017-5715. A quote from goolge project zero blog: "At this point, it would normally be necessary to locate gadgets in the host kernel code that can be used to actually leak data by reading from an attacker-controlled location, shifting and masking the result appropriately and then using the result of that as offset to an attacker-controlled address for a load. But piecing gadgets together and figuring out which ones work in a speculation context seems annoying. So instead, we decided to use the eBPF interpreter, which is built into the host kernel - while there is no legitimate way to invoke it from inside a VM, the presence of the code in the host kernel's text section is sufficient to make it usable for the attack, just like with ordinary ROP gadgets." To make attacker job harder introduce BPF_JIT_ALWAYS_ON config option that removes interpreter from the kernel in favor of JIT-only mode. So far eBPF JIT is supported by: x64, arm64, arm32, sparc64, s390, powerpc64, mips64 The start of JITed program is randomized and code page is marked as read-only. In addition "constant blinding" can be turned on with net.core.bpf_jit_harden v2->v3: - move __bpf_prog_ret0 under ifdef (Daniel) v1->v2: - fix init order, test_bpf and cBPF (Daniel's feedback) - fix offloaded bpf (Jakub's feedback) - add 'return 0' dummy in case something can invoke prog->bpf_func - retarget bpf tree. For bpf-next the patch would need one extra hunk. It will be sent when the trees are merged back to net-next Considered doing: int bpf_jit_enable __read_mostly = BPF_EBPF_JIT_DEFAULT; but it seems better to land the patch as-is and in bpf-next remove bpf_jit_enable global variable from all JITs, consolidate in one place and remove this jit_init() function. Signed-off-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann Signed-off-by: Greg Kroah-Hartman commit 361fb0481247bea4da3eb122e685c8b72ef7c8a9 Author: Alexei Starovoitov Date: Tue Jan 30 03:37:40 2018 +0100 bpf: fix bpf_tail_call() x64 JIT [ upstream commit 90caccdd8cc0215705f18b92771b449b01e2474a ] - bpf prog_array just like all other types of bpf array accepts 32-bit index. Clarify that in the comment. - fix x64 JIT of bpf_tail_call which was incorrectly loading 8 instead of 4 bytes - tighten corresponding check in the interpreter to stay consistent The JIT bug can be triggered after introduction of BPF_F_NUMA_NODE flag in commit 96eabe7a40aa in 4.14. Before that the map_flags would stay zero and though JIT code is wrong it will check bounds correctly. Hence two fixes tags. All other JITs don't have this problem. Signed-off-by: Alexei Starovoitov Fixes: 96eabe7a40aa ("bpf: Allow selecting numa node during map creation") Fixes: b52f00e6a715 ("x86: bpf_jit: implement bpf_tail_call() helper") Acked-by: Daniel Borkmann Acked-by: Martin KaFai Lau