--- title: "Power Analysis for Moderation, Mediation, and Moderated Mediation" date: "2025-08-31" output: rmarkdown::html_vignette: options: toc: depth: 2 number_sections: true vignette: > %\VignetteIndexEntry{Power Analysis for Moderation, Mediation, and Moderated Mediation} %\VignetteEngine{knitr::rmarkdown} %\VignetteEncoding{UTF-8} bibliography: references.bib csl: apa.csl --- # Introduction This article is a brief illustration of how to use `power4test()` from the package [power4mome](https://sfcheung.github.io/power4mome/) to do power analysis of mediation, moderation, and moderated mediation in a model to be fitted by structural equation modeling using `lavaan`. # Prerequisite Basic knowledge about fitting models by `lavaan` is required. Readers are also expected to have basic knowledge of mediation, moderation, and/or moderated mediation. # Scope This is a brief illustration. More complicated scenarios and other features of `power4mome` will be described in other vignettes. # Package This introduction only needs the following package: ``` r library(power4mome) ``` # Workflow Two functions are sufficient for estimating power given a model, population values, sample size, and the test to be used. This is the workflow: 1. Specify the model syntax for the population model, in `lavaan` style, and set the population values of the model parameters. 3. Call `power4test()` to examine the setup and the datasets generated. Repeat this and previous steps until the model is specified correctly. 4. Call `power4test()` again, with the test to do specified. 5. Call `rejection_rates()` to compute the power. # Mediation Let's consider a simple mediation model. We would like to estimate the power of testing a mediation effect by Monte Carlo confidence interval. ## Specify the Population Model This is the model syntax ``` r mod <- " m ~ x y ~ m + x " ``` Note that, even if we are going to test mediation, moderation, or moderated mediation effects, we do not need to add any labels to this model. This will be taken care of by the test functions, through the use of the package [`manymome`](https://sfcheung.github.io/manymome/) [@cheung_manymome_2024]. ## Specify The Population Values {#es_convention} There are two approaches to do this: - Using named vectors or lists. - Using a multiline string similar to `lavaan` model syntax. The second approach is demonstrated below. Suppose we want to estimate the power when: - The path from `x` to `m` are "large" in strength. - The path from `m` to `y` are "medium" in strength. - The path from `x` to `m` are "small" in strength. By default, `power4mome` uses this convention for regression path and correlation:^[ Users can specify the values directly if necessary.] - Small: .10 (or -.10) - Medium: .30 (or -.30) - Large: .50 (or -.50) For a product term in moderation, this is the convention: - Small: .05 (or -.05) - Medium: .10 (or -.10) - Large: .15 (or -.15) All these values are for the standardized solution (the correlations and so-called "betas"). The following string denotes the desired values: ``` r mod_es <- " m ~ x: l y ~ m: m y ~ x: s " ``` Each line starts with a *tag*, which is the parameter presented in `lavaan` syntax. The tag ends with a colon, `:`. After the colon is *population value*, which can be: - A string denoting the value. By default: - `s`: Small. (`-s` for small and negative.) - `m`: Medium. (`-m` for medium and negative.) - `l`: Large. (`-l` for large and negative.) - `nil`: Zero. All other regression coefficients and covariances, if not specified in this string, are set to zero. ## Call `power4test()` to Check the Model ``` r out <- power4test(nrep = 2, model = mod, pop_es = mod_es, n = 50000, iseed = 1234) ``` These are the arguments used: - `nrep`: The number of replications. In this stage, a small number can be used. It is more important to have a large sample size than to have many replications. - `model`: The model syntax. - `pop_es`: The string setting the population values. - `n`: The sample size in each replications. In this stage, just for checking the model and the data generation, this number can be set to a large value unless the model is slow to fit when the sample size is large. - `iseed`: If supplied, it is used to set the seed for the random number generator. It is advised to always set this to an arbitrary integer, to make the results reproducible.^[The functions used are `parallel::clusterSetRNGStream()` for parallel processing, and `set.seed()` for serial processing.] The population values can be shown by printing this object: ``` r out #> #> ====================== Model Information ====================== #> #> == Model on Factors/Variables == #> #> m ~ x #> y ~ m + x #> #> == Model on Variables/Indicators == #> #> m ~ x #> y ~ m + x #> #> ====== Population Values ====== #> #> Regressions: #> Population #> m ~ #> x 0.500 #> y ~ #> m 0.300 #> x 0.100 #> #> Variances: #> Population #> .m 0.750 #> .y 0.870 #> x 1.000 #> #> (Computing indirect effects for 2 paths ...) #> #> == Population Conditional/Indirect Effect(s) == #> #> == Indirect Effect(s) == #> #> ind #> x -> m -> y 0.150 #> x -> y 0.100 #> #> - The 'ind' column shows the indirect effect(s). #> #> ======================= Data Information ======================= #> #> Number of Replications: 2 #> Sample Sizes: 50000 #> #> Call print with 'data_long = TRUE' for further information. #> #> ==================== Extra Element(s) Found ==================== #> #> - fit #> #> === Element(s) of the First Dataset === #> #> ============ ============ #> #> lavaan 0.6-19 ended normally after 1 iteration #> #> Estimator ML #> Optimization method NLMINB #> Number of model parameters 5 #> #> Number of observations 50000 #> #> Model Test User Model: #> #> Test statistic 0.000 #> Degrees of freedom 0 ``` By default, the population model will be fitted to each dataset, hence the section ``. Perfect fit is expected if the population model is a saturated model. We check the section `Population Values` to see whether the values are what we expected. - In this example, the population values for the regression paths are what we specified. If they are different from what we expect, check the string for `pop_es` to see whether we set the population values correctly. If necessary, we can check the data generation by adding `data_long = TRUE` when printing the output: ``` r print(out, data_long = TRUE) #> #> ====================== Model Information ====================== #> #> == Model on Factors/Variables == #> #> m ~ x #> y ~ m + x #> #> == Model on Variables/Indicators == #> #> m ~ x #> y ~ m + x #> #> ====== Population Values ====== #> #> Regressions: #> Population #> m ~ #> x 0.500 #> y ~ #> m 0.300 #> x 0.100 #> #> Variances: #> Population #> .m 0.750 #> .y 0.870 #> x 1.000 #> #> (Computing indirect effects for 2 paths ...) #> #> == Population Conditional/Indirect Effect(s) == #> #> == Indirect Effect(s) == #> #> ind #> x -> m -> y 0.150 #> x -> y 0.100 #> #> - The 'ind' column shows the indirect effect(s). #> #> ======================= Data Information ======================= #> #> Number of Replications: 2 #> Sample Sizes: 50000 #> #> ==== Descriptive Statistics ==== #> #> vars n mean sd skew kurtosis se #> m 1 1e+05 0.00 1 0.01 0.03 0 #> y 2 1e+05 0.01 1 0.01 0.00 0 #> x 3 1e+05 0.00 1 0.01 0.01 0 #> #> ===== Parameter Estimates Based on All 2 Samples Combined ===== #> #> Total Sample Size: 100000 #> #> ==== Standardized Estimates ==== #> #> Variances and error variances omitted. #> #> Regressions: #> est.std #> m ~ #> x 0.500 #> y ~ #> m 0.295 #> x 0.102 #> #> #> ==================== Extra Element(s) Found ==================== #> #> - fit #> #> === Element(s) of the First Dataset === #> #> ============ ============ #> #> lavaan 0.6-19 ended normally after 1 iteration #> #> Estimator ML #> Optimization method NLMINB #> Number of model parameters 5 #> #> Number of observations 50000 #> #> Model Test User Model: #> #> Test statistic 0.000 #> Degrees of freedom 0 ``` The section `Descriptive Statistics`, generated by `psych::describe()`, shows basic descriptive statistics for the observed variables. As expected, they have means close to zero and standard deviations close to one, because the datasets were generated using the standardized model. The section `Parameter Estimates Based on` shows the parameter estimates when the *population model* is fitted to *all the datasets combined*. When the total sample size is large, these estimates should be close to the population values. The results show that we have specified the population model correctly. We can proceed to specify the test and estimate the power. ## Call `power4test()` to Do the Target Test {#med_power} We can now do the simulation to estimate power. A large number of datasets (e.g., 500) of the target sample size are to be generated, and then the target test will be conducted in each of these datasets. Suppose we would like to estimate the power of using Monte Carlo confidence intervals to test the indirect effect from `x` to `y` through `m`, when sample size is 50. This is the call: ``` r out <- power4test(nrep = 400, model = mod, pop_es = mod_es, n = 50, R = 2000, ci_type = "mc", test_fun = test_indirect_effect, test_args = list(x = "x", m = "m", y = "y", mc_ci = TRUE), iseed = 1234, parallel = TRUE) ``` These are the new arguments used: - `R`: The number of replications used to generate the Monte Carlo simulated estimates, 2000 in this example. In real studies, this number should be 10000 or even 20000 for Monte Carlo confidence intervals. However, 2000 is sufficient because the goal is to estimate power by generating many intervals, rather than to have one single stable interval. - `ci_type`: The method used to generate estimates. Support both Monte Carlo (`"mc"`) and nonparametric bootstrapping (`"boot"`).^[They are implemented by `manymome::do_mc()` and `manymome::do_boot()`, respectively.] Although bootstrapping is usually used to test an indirect effect, it is very slow to do `R` bootstrapping in `nrep` datasets (the model will be fitted `R * nrep` times). Therefore, it is preferable to use Monte Carlo confidence intervals to do the initial estimation. - `test_fun`: The function to be used to do the test for each replication. Any function following a specific requirement can be used, and `power4mome` comes with several built-in functions for some common tests. The function `test_indirect_effect()` is used to test an indirect effect in the model. - `test_args`: A named list of arguments to be supplied to `test_fun`. For `test_indirect_effect()`, it is a named list specifying the predictor (`x`), the mediator(s) (`m`), and the outcome (`y`). A path with any number of mediators can be supported. Please refer to the help page of `test_indirect_effect()`.^[The test is implemented by `manymome::indirect()`.] - `parallel`: If the test to be conducted is slow, which is the case for tests done by Monte Carlo or nonparametric bootstrapping confidence intervals, it is advised to enable parallel processing by setting `parallel` to `TRUE`.^[The number of cores is determined automatically but can be set directly by the `ncores` argument.] For `nrep = 400`, the 95% confidence limits for a power of .80 are about .04 below and above .80. This should be precise enough for determining whether a sample size has sufficient power. This is the default printout: ``` r out #> #> ====================== Model Information ====================== #> #> == Model on Factors/Variables == #> #> m ~ x #> y ~ m + x #> #> == Model on Variables/Indicators == #> #> m ~ x #> y ~ m + x #> #> ====== Population Values ====== #> #> Regressions: #> Population #> m ~ #> x 0.500 #> y ~ #> m 0.300 #> x 0.100 #> #> Variances: #> Population #> .m 0.750 #> .y 0.870 #> x 1.000 #> #> (Computing indirect effects for 2 paths ...) #> #> == Population Conditional/Indirect Effect(s) == #> #> == Indirect Effect(s) == #> #> ind #> x -> m -> y 0.150 #> x -> y 0.100 #> #> - The 'ind' column shows the indirect effect(s). #> #> ======================= Data Information ======================= #> #> Number of Replications: 400 #> Sample Sizes: 50 #> #> Call print with 'data_long = TRUE' for further information. #> #> ==================== Extra Element(s) Found ==================== #> #> - fit #> - mc_out #> #> === Element(s) of the First Dataset === #> #> ============ ============ #> #> lavaan 0.6-19 ended normally after 1 iteration #> #> Estimator ML #> Optimization method NLMINB #> Number of model parameters 5 #> #> Number of observations 50 #> #> Model Test User Model: #> #> Test statistic 0.000 #> Degrees of freedom 0 #> #> =========== =========== #> #> #> == A 'mc_out' class object == #> #> Number of Monte Carlo replications: 2000 #> #> #> ====================== Test(s) Conducted ====================== #> #> - test_indirect: x->m->y #> #> Call print() and set 'test_long = TRUE' for a detailed report. ``` If `test_long = TRUE` is added when printing the output by `print()`, a summary of the test will also be printed. ```r print(out, test_long = TRUE) ``` The summary of the test: ``` #> #> Test statistic 0.000 #> Degrees of freedom 0 #> #> =========== =========== #> #> #> == A 'mc_out' class object == #> #> Number of Monte Carlo replications: 2000 ``` The mean of the estimates across all the replications is 0.152, close to the population value. ## Compute the Power The power estimate is simply the proportion of significant results, the *rejection* *rate*, because the null hypothesis is false. In addition to using `test_long = TRUE` in `print()`, the rejection rate can also be retrieved by `rejection_rates()`. ``` r out_power <- rejection_rates(out) out_power #> [test]: test_indirect: x->m->y #> [test_label]: Test #> est p.v reject r.cilo r.cihi #> 1 0.152 1.000 0.468 0.419 0.516 #> Notes: #> - p.v: The proportion of valid replications. #> - est: The mean of the estimates in a test across replications. #> - reject: The proportion of 'significant' replications, that is, the #> rejection rate. If the null hypothesis is true, this is the Type I #> error rate. If the null hypothesis is false, this is the power. #> - r.cilo,r.cihi: The confidence interval of the rejection rate, based #> on normal approximation. #> - Refer to the tests for the meanings of other columns. ``` In the example above, the estimated power of the test of the indirect effect, conducted by Monte Carlo confidence intervals, is 0.468, under the column `reject`. `p.v` is the proportion of valid results across replications. `1.000` means that the test conducted normally in all replications. By default, the 95% confidence interval of the rejection rate (power) based on normal approximation is also printed, under the column `r.cilo` and `r.cihi`. In this example, the 95% confidence interval is [0.419; 0.516]. # Moderation Let's consider a moderation model, with some control variables. ## Specify the Population Model and Values {#pop_es_xw} ``` r mod2 <- " y ~ x + w + x:w + control " ``` This model has only moderation, with the predictor `x` and the moderator `w`. The product term is included in the `lavaan` style, `x:w`. It is unrealistic to specific the population values for all control variables. Therefore, we can just add a *proxy*, `control` to represent the *set of control variables* that may be included. This is the syntax for the population values: ``` r mod2_es <- " .beta.: s x ~~ control: s y ~ control: s y ~ x:w: l " ``` This example introduces one useful tag, `.beta.` For a model with many paths, it is inconvenient to specify all of them manually. The tag `.beta.` specifies the *default value* for *all regression paths not specified explicitly*, which is small (.10) in this example. If a path is explicitly included (such as `y ~ control` and `y ~ x:w`), the manually specified value will be used instead of `.beta.`. This example also illustrates that we can set the population values for *correlations* (covariances in the standardized solution). Control variables are included usually because they may correlate with the predictors. Therefore, in this example, it is hypothesized that there is a small correlation between `x` and the proxy control variable (`x ~~ control: s`). Last, recall from [this section](#es_convention) that the convention for product term values is different: `l` denotes .15 for product terms. ## Call `power4test()` to Check the Model We check the model first: ``` r out2 <- power4test(nrep = 2, model = mod2, pop_es = mod2_es, n = 50000, iseed = 1234) ``` ``` r print(out2, data_long = TRUE) #> #> ====================== Model Information ====================== #> #> == Model on Factors/Variables == #> #> y ~ x + w + x:w + control #> #> == Model on Variables/Indicators == #> #> y ~ x + w + x:w + control #> #> ====== Population Values ====== #> #> Regressions: #> Population #> y ~ #> x 0.100 #> w 0.100 #> x:w 0.150 #> control 0.100 #> #> Covariances: #> Population #> x ~~ #> w 0.000 #> x:w 0.000 #> control 0.100 #> w ~~ #> x:w 0.000 #> control 0.000 #> x:w ~~ #> control 0.000 #> #> Variances: #> Population #> .y 0.945 #> x 1.000 #> w 1.000 #> x:w 1.000 #> control 1.000 #> #> (Computing indirect effects for 1 paths ...) #> #> (Computing conditional effects for 2 paths ...) #> #> == Population Conditional/Indirect Effect(s) == #> #> == Effect(s) == #> #> ind #> control -> y 0.100 #> #> - The 'ind' column shows the effect(s). #> #> == Conditional effects == #> #> Path: x -> y #> Conditional on moderator(s): w #> Moderator(s) represented by: w #> #> [w] (w) ind #> 1 M+1.0SD 1 0.250 #> 2 Mean 0 0.100 #> 3 M-1.0SD -1 -0.050 #> #> - The 'ind' column shows the conditional effects. #> #> #> == Conditional effects == #> #> Path: w -> y #> Conditional on moderator(s): x #> Moderator(s) represented by: x #> #> [x] (x) ind #> 1 M+1.0SD 1 0.250 #> 2 Mean 0 0.100 #> 3 M-1.0SD -1 -0.050 #> #> - The 'ind' column shows the conditional effects. #> #> #> ======================= Data Information ======================= #> #> Number of Replications: 2 #> Sample Sizes: 50000 #> #> ==== Descriptive Statistics ==== #> #> vars n mean sd skew kurtosis se #> y 1 1e+05 0.00 1 0.02 0.01 0 #> x 2 1e+05 0.00 1 0.01 0.01 0 #> w 3 1e+05 0.00 1 0.00 -0.02 0 #> x:w 4 1e+05 0.00 1 -0.03 6.01 0 #> control 5 1e+05 0.01 1 0.00 0.00 0 #> #> ===== Parameter Estimates Based on All 2 Samples Combined ===== #> #> Total Sample Size: 100000 #> #> ==== Standardized Estimates ==== #> #> Variances and error variances omitted. #> #> Regressions: #> est.std #> y ~ #> x 0.097 #> w 0.104 #> x:w 0.152 #> control 0.099 #> #> Covariances: #> est.std #> x ~~ #> w -0.003 #> x:w 0.002 #> control 0.101 #> w ~~ #> x:w -0.004 #> control 0.001 #> x:w ~~ #> control 0.004 #> #> #> ==================== Extra Element(s) Found ==================== #> #> - fit #> #> === Element(s) of the First Dataset === #> #> ============ ============ #> #> lavaan 0.6-19 ended normally after 1 iteration #> #> Estimator ML #> Optimization method NLMINB #> Number of model parameters 5 #> #> Number of observations 50000 #> #> Model Test User Model: #> #> Test statistic 0.000 #> Degrees of freedom 0 ``` The population values for the regression paths are what we specified, and the estimates based on 5 × 104 by 2 or 100000 support that the dataset were generated correctly. NOTE: If a product term is involved, and the component terms (`x` and `w` in this example) are correlated, the population standard deviation of this product term may not be equal to one [@bohrnstedt_exact_1969]. Therefore, the model can be specified correctly even if the standard deviations of product terms in the section `Descriptive Statistics` are not close to one. ## Call `power4test()` to Test The Moderation Effect We can now do the simulation to estimate power. In this simple model, the test is just a test of the product term, `x:w`. This model can be fitted by linear regression using `lm()`. Let's estimate the power when the sample size is 50 and the model is fitted by `lm()`: ``` r out2 <- power4test(nrep = 400, model = mod2, pop_es = mod2_es, n = 100, fit_model_args = list(fit_function = "lm"), test_fun = test_moderation, iseed = 1234, parallel = TRUE) ``` These are the new arguments used: - `fit_model_args`: This named list stores additional arguments for `fit_model()`. By default, `lavaan::sem()` is used. To fit the model by linear regression using `lm()`, add `fit_function = "lm"` to the list.^[See the help page of `fit_model()` on other available arguments.] - `test_fun`: It is set to `test_moderation`, provided by `power4mome`. This function automatically identifies all product terms in a model and test them. The test used depends on method used to fit the model. If `lm()` is used, then the usual *t* test is used.^[The test name has `CIs` in it but this is equivalent to using the *t* test when the model is fitted by `lm()`.] ## Compute the Power We can ues `rejection_rates()` again to estimate the power: ``` r out2_power <- rejection_rates(out2) out2_power #> [test]: test_moderation: CIs #> [test_label]: y~x:w #> est p.v reject r.cilo r.cihi #> 1 0.158 1.000 0.347 0.301 0.394 #> Notes: #> - p.v: The proportion of valid replications. #> - est: The mean of the estimates in a test across replications. #> - reject: The proportion of 'significant' replications, that is, the #> rejection rate. If the null hypothesis is true, this is the Type I #> error rate. If the null hypothesis is false, this is the power. #> - r.cilo,r.cihi: The confidence interval of the rejection rate, based #> on normal approximation. #> - Refer to the tests for the meanings of other columns. ``` The estimated power of the test of the product term, `x:w`, is 0.347, with 95% confidence interval [0.301; 0.394]. # Moderated mediation Let's consider a moderated mediation model. ## Specify the Population Model and Values ``` r mod3 <- " m ~ x + w + x:w y ~ m + x " ``` This model is a mediation model with the *a*-path, `m ~ x`, moderated by `w`. As explained before, there is no need to use any label nor define and parameters. This will be handled by the test function to be used. This is the syntax for the population values: ``` r mod3_es <- " .beta.: s m ~ x: m y ~ m: m m ~ x:w: s " ``` Please refer to [the previous section](#pop_es_xw) on setting up this syntax. ## Call `power4test()` to Check the Model We check the model first: ``` r out3 <- power4test(nrep = 2, model = mod3, pop_es = mod3_es, n = 50000, iseed = 1234) ``` ``` r print(out3, data_long = TRUE) #> #> ====================== Model Information ====================== #> #> == Model on Factors/Variables == #> #> m ~ x + w + x:w #> y ~ m + x #> #> == Model on Variables/Indicators == #> #> m ~ x + w + x:w #> y ~ m + x #> #> ====== Population Values ====== #> #> Regressions: #> Population #> m ~ #> x 0.300 #> w 0.100 #> x:w 0.050 #> y ~ #> m 0.300 #> x 0.100 #> #> Covariances: #> Population #> x ~~ #> w 0.000 #> x:w 0.000 #> w ~~ #> x:w 0.000 #> #> Variances: #> Population #> .m 0.898 #> .y 0.881 #> x 1.000 #> w 1.000 #> x:w 1.000 #> #> (Computing indirect effects for 1 paths ...) #> #> (Computing conditional effects for 2 paths ...) #> #> == Population Conditional/Indirect Effect(s) == #> #> == Effect(s) == #> #> ind #> x -> y 0.100 #> #> - The 'ind' column shows the effect(s). #> #> == Conditional indirect effects == #> #> Path: x -> m -> y #> Conditional on moderator(s): w #> Moderator(s) represented by: w #> #> [w] (w) ind m~x y~m #> 1 M+1.0SD 1 0.105 0.350 0.300 #> 2 Mean 0 0.090 0.300 0.300 #> 3 M-1.0SD -1 0.075 0.250 0.300 #> #> - The 'ind' column shows the conditional indirect effects. #> - 'm~x','y~m' is/are the path coefficient(s) along the path conditional #> on the moderator(s). #> #> #> == Conditional indirect effects == #> #> Path: w -> m -> y #> Conditional on moderator(s): x #> Moderator(s) represented by: x #> #> [x] (x) ind m~w y~m #> 1 M+1.0SD 1 0.045 0.150 0.300 #> 2 Mean 0 0.030 0.100 0.300 #> 3 M-1.0SD -1 0.015 0.050 0.300 #> #> - The 'ind' column shows the conditional indirect effects. #> - 'm~w','y~m' is/are the path coefficient(s) along the path conditional #> on the moderator(s). #> #> #> ======================= Data Information ======================= #> #> Number of Replications: 2 #> Sample Sizes: 50000 #> #> ==== Descriptive Statistics ==== #> #> vars n mean sd skew kurtosis se #> m 1 1e+05 0 1 0.03 0.03 0 #> y 2 1e+05 0 1 0.01 -0.01 0 #> x 3 1e+05 0 1 0.00 -0.02 0 #> w 4 1e+05 0 1 0.00 0.01 0 #> x:w 5 1e+05 0 1 0.04 5.92 0 #> #> ===== Parameter Estimates Based on All 2 Samples Combined ===== #> #> Total Sample Size: 100000 #> #> ==== Standardized Estimates ==== #> #> Variances and error variances omitted. #> #> Regressions: #> est.std #> m ~ #> x 0.303 #> w 0.099 #> x:w 0.052 #> y ~ #> m 0.299 #> x 0.098 #> #> Covariances: #> est.std #> x ~~ #> w 0.003 #> x:w -0.001 #> w ~~ #> x:w 0.008 #> #> #> ==================== Extra Element(s) Found ==================== #> #> - fit #> #> === Element(s) of the First Dataset === #> #> ============ ============ #> #> lavaan 0.6-19 ended normally after 1 iteration #> #> Estimator ML #> Optimization method NLMINB #> Number of model parameters 7 #> #> Number of observations 50000 #> #> Model Test User Model: #> #> Test statistic 0.007 #> Degrees of freedom 2 #> P-value (Chi-square) 0.997 ``` The population values and the estimates based on 5 × 104 by 2 or 100000 are what we expect. ## Call `power4test()` to Test The Moderated Mediation Effect To estimate the power of a moderated mediation effect, we can test the *index of moderated mediation* [@hayes_index_2015]. In this example, it is the product of the coefficient `m ~ x:w` and the coefficient `y ~ m`. This can be done by the test function `test_index_of_mome()`, provided by `power4mome`. Again, Monte Carlo confidence interval is used. Let's estimate the power when sample size is 100. ``` r out3 <- power4test(nrep = 400, model = mod3, pop_es = mod3_es, n = 100, R = 2000, ci_type = "mc", test_fun = test_index_of_mome, test_args = list(x = "x", m = "m", y = "y", w = "w", mc_ci = TRUE), iseed = 1234, parallel = TRUE) ``` The call is similar to the one used in [testing mediation](#med_power). This is the new argument used: - `test_fun`: It is set to `test_index_of_mome()` in this example. This function is similar to `test_indirect_effect()`, with one more argument, `w`, for the moderator. Although this example has only one mediator, it support any number of mediators along a path.^[The test is implemented by `manymome::test_index_of_mome()`.] ## Compute the Power We can ues `rejection_rates()` again to estimate the power: ``` r out3_power <- rejection_rates(out3) out3_power #> [test]: test_index_of_mome: x->m->y, moderated by w #> [test_label]: Test #> est p.v reject r.cilo r.cihi #> 1 0.016 1.000 0.055 0.033 0.077 #> Notes: #> - p.v: The proportion of valid replications. #> - est: The mean of the estimates in a test across replications. #> - reject: The proportion of 'significant' replications, that is, the #> rejection rate. If the null hypothesis is true, this is the Type I #> error rate. If the null hypothesis is false, this is the power. #> - r.cilo,r.cihi: The confidence interval of the rejection rate, based #> on normal approximation. #> - Refer to the tests for the meanings of other columns. ``` The estimated power of the test of moderated mediation effect, conducted by a test of the index of moderated mediation, is 0.055, 95% confidence interval [0.033; 0.077]. Unlike the previous example on moderation tested by regression, estimating the power of Monte Carlo confidence intervals is substantially slower. However, this is necessary because Monte Carlo or nonparametric bootstrapping confidence interval is the test usually used in moderated mediation (and mediation). # Repeating a Simulation With A Different Sample Size {#new_n} The function `power4test()` also supports *redoing* an analysis using a new value for the sample size (or population effect sizes set to `pop_es`). Simply - set the output of `power4test` as the first argument, and - set the *new value* for `n`. For example, we can repeat the simulation for the test of moderation [above](#pop_es_xw), but for a sample size of 200. We simply call `power4test()` again, set the previous output (`out2` in the example for moderation) as the first argument, and set `n` to a new value (200 in this example): ``` r out2_new_n <- power4test(out2, n = 200) out2_new_n ``` This is the estimated power when the sample size is 200. ``` r out2_new_n_reject <- rejection_rates(out2_new_n) out2_new_n_reject #> [test]: test_moderation: CIs #> [test_label]: y~x:w #> est p.v reject r.cilo r.cihi #> 1 0.148 1.000 0.527 0.479 0.576 #> Notes: #> - p.v: The proportion of valid replications. #> - est: The mean of the estimates in a test across replications. #> - reject: The proportion of 'significant' replications, that is, the #> rejection rate. If the null hypothesis is true, this is the Type I #> error rate. If the null hypothesis is false, this is the power. #> - r.cilo,r.cihi: The confidence interval of the rejection rate, based #> on normal approximation. #> - Refer to the tests for the meanings of other columns. ``` The estimated power is 0.527, 95% confidence interval [0.479; 0.576], when the sample size is 200. This technique can be repeated to find the required sample size for a target power, and can be used for all the other scenarios covered above, such as mediation and moderated mediation. # Find the Sample Size With The Desired Power There are several more efficient ways to find the sample size with the desired power. ## Using `n_region_from_power()` The function `n_region_from_power()` can be used to find the *region* of sample sizes likely to have the desired power. If the default settings are to be used, then it can be called directly on the output of `power4test()`: ``` r out2_region <- n_region_from_power(out2, seed = 2345) ``` This is the recommended way for sample size planning, when there is no predetermined range of sample sizes. See [the templates](https://sfcheung.github.io/power4mome/articles/) for examples on using `n_region_from_power()` for common models. ## Using `power4test_by_n()` The function `power4test_by_n()` can be used To estimate the power for a sequence of sample sizes. For example, we can estimate the power in the moderation model above for these sample sizes: 250, 300, 350, 400. ``` r out2_several_ns <- power4test_by_n(out2, n = c(250, 300, 350, 400), by_seed = 4567) ``` The first argument is the output of `power4test()` for an arbitrary sample size. The argument `n` is a numeric vector of sample sizes to examine. The argument `by_seed`, if set to an integer, try to make the results reproducible. The call will take some times to run because it is equivalent to calling `power4test()` once for each sample size. The rejection rates for each sample size can be retrieved by `rejection_rates()` too: ``` r rejection_rates(out2_several_ns) #> [test]: test_moderation: CIs #> [test_label]: y~x:w #> n est p.v reject r.cilo r.cihi #> 1 250 0.149 1.000 0.660 0.614 0.706 #> 2 300 0.150 1.000 0.733 0.689 0.776 #> 3 350 0.151 1.000 0.810 0.772 0.848 #> 4 400 0.150 1.000 0.850 0.815 0.885 #> Notes: #> - n: The sample size in a trial. #> - p.v: The proportion of valid replications. #> - est: The mean of the estimates in a test across replications. #> - reject: The proportion of 'significant' replications, that is, the #> rejection rate. If the null hypothesis is true, this is the Type I #> error rate. If the null hypothesis is false, this is the power. #> - r.cilo,r.cihi: The confidence interval of the rejection rate, based #> on normal approximation. #> - Refer to the tests for the meanings of other columns. ``` The results show that, to have a power of about .800 to detect the moderation effect, a sample size of about 350 is needed. This approach is used when the range of sample sizes has already been decided and the levels of power are needed to determine the final sample size. Please refer to the help page of `power4test_by_n()` for other examples. ## Using `x_from_power()` The function `x_from_power()` can be used to systematically search within an interval the sample size with the target power. This takes longer to run but, instead of manually trying different sample size, this function do the search automatically. This approach can be used when the goal is to find the probable minimum or maximum sample size with the desired level of power. The first approach, using `n_region_from_power()`, simply uses this approach twice to find the region of sample sizes. See [this article](https://sfcheung.github.io/power4mome/articles/x_from_power_for_n.html) for an illustration of how to use `x_from_power()`. # Other Advanced Features This brief illustration only covers the basic features of `power4mome`. These are other advanced features to be covered in other articles: - There is no inherent restriction on the form of the model. Typical models that can be specified in `lavaan` model syntax can be the population model, although there may be special models in which `power4test` does not yet support. - The population model can be a model with latent factors and indicators. Nevertheless, users can specify only the relation among the factors. There is no need to include indicators in the model syntax, and also no need to manually specify the factor loadings. The number of indicators for each factor and the factor loadings are set by the argument `number_of_indicators` and `reliability` (see the help page of `sim_data()` on how to set them). The model syntax used to fit to the data will automatically include the indicators. An introduction can be found in `vignette("power4test_latent_mediation")`. Examples can be found in [templates](https://sfcheung.github.io/power4mome/articles/) for models with latent variables. - Though not illustrated above, estimating the power of tests conducted by nonparametric bootstrapping is supported, although it will take longer to run. - Although this package focuses on moderation, mediation, and moderated mediation, in principle, the power of any test can be estimated, as long as a test function for `test_fun` is available. Some other functions are provided with `power4mome` (e.g., `test_parameters()` for testing all free model parameters). See the help page of `do_test()` on how to write a function to do a test not available in `power4mome`. - When estimating power, usually the population model is fitted to the data. However, it is possible to fit any other model to the generated data. This can be done by using the argument `fit_model_args` to set the argument `model` of `fit_model()`. - Preliminary support for multigroup model is available. See the help pages of `ptable_pop()` and `pop_es_yaml()` on how to specify the population value syntax. Functions will be added for tests relevant to multigroup models (e.g., testing the between-group difference in an indirect effect). - Although we illustrated only rerunning an analysis with a new sample size (`n`), it is also possible to rerun an analysis using a new population value for a parameter. This can be done by using the previous output of `power4test()` as the first argument, and setting only `pop_es` to a named vector: ```r out2_new_xw <- power4test(out2, pop_es = c("y ~ x:w" = ".30")) ``` - Basic support for generating nonnormal variables, including dichotomous variables is available. See the argument `x_fun` of `power4test()` for details. # Limitations - Monte Carlo confidence interval is not supported for models fitted by `lm()` (regression). To estimate power of testing mediation or moderated mediation effects in models fitted by `lm()`, `ci_type = "boot"` is needed. # References