#!/bin/sh
dialog --title "Install packages from series A (Base System)" \
       --checklist "Please select the packages you would like to run from the Slackware CD-ROM.  The disc must be mounted under /cdrom for this to work. If you are upgrading a package that currently runs from your hard drive, you may wish to save any configuration files first. (they will be reset) NOTE: Many of the packages from the A series cannot be safely installed except from a bootdisk, so make sure you know what you're doing. Press ENTER when you are done." \
20 70 6 \
"base" "Basic Linux filesystem package" "off" \
"devs" "Device files" "off" \
"idekern" "Linux kernel 1.1.59 for IDE" "off" \
"scsikern" "Linux kernel 1.1.59 for IDE/SCSI" "off" \
"sysvinit" "SysV style init v. 2.4" "off" \
"bin" "Binaries that go in /bin and /usr/bin" "off" \
"getty" "getty_ps 2.0.7e" "off" \
"gzip" "GNU zip compression utilities" "off" \
"ldso" "ld.so 1.4.4, the dynamic linker/loader" "off" \
"ps" "procps 0.97" "off" \
"shlibs" "The shared C libraries libc.so.4.5.26" "off" \
"util" "util-linux 1.10" "off" \
"bash" "GNU bash-1.14.2" "off" \
"comms" "Serial file-transfer and comm programs" "off" \
"cpio" "The GNU cpio backup and archiving util" "off" \
"e2fsbn" "Utilities for the second extended fs" "off" \
"find" "GNU find 3.8" "off" \
"gpm" "General purpose mouse support v0.17" "off" \
"grep" "GNU grep 2.0" "off" \
"keytbls" "kbd 0.88" "off" \
"less" "less-237" "off" \
"lpr" "BSD print spooling system" "off" \
"shellutl" "GNU shellutils 1.9.4" "off" \
"syslogd" "Sysklogd 1.2" "off" \
"tar" "GNU tar 1.11.2" "off" \
"textutl" "GNU textutil 1.9" "off" \
"zoneinfo" "Time zone utilities" "off" \
"etc" "System configuration files that go in /etc" "off" \
"hdsetup" "The Slackware setup system" "off" \
"lilo" "LILO 0.15" "off" \
"loadlin" "LOADLIN v1.5" "off" \
"tcsh" "tcsh 6.04" "off" \
"umsprogs" "umsdos_progs 0.3a" "off" \
2> /tmp/return
if fgrep '"base"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package base to run from CD" --infobox \
"Basic Linux filesystem package.\n\
\n\
Sets up the basic directory structure and adds a few important\n\
binaries such as GNU mtools 2.0.7 and fdisk.\n\
\n\
" 7 75
 installpkg a1/base.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"devs"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package devs to your hard drive" --infobox \
"Device files.\n\
\n\
This package creates special files in the /dev directory that \n\
represent your system's hardware.\n\
\n\
" 7 75
 installpkg a1/devs.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"idekern"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package idekern to your hard drive" --infobox \
"Linux kernel version 1.1.59, without SCSI support.\n\
\n\
A Linux kernel for computers that do not need SCSI support. You MUST\n\
install a kernel image in order for your system to boot. This kernel\n\
also contains UMSDOS and PPP.  See the file 'config.in' for an exact\n\
list of included drivers.\n\
\n\
***IMPORTANT***!  If you have special hardware, such as a non-SCSI\n\
CD-ROM drive, you'll need to install a kernel from the Q series that\n\
supports it, or compile the support into your own custom kernel.\n\
\n\
" 13 75
 installpkg a1/idekern.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"scsikern"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package scsikern to your hard drive" --infobox \
"Linux kernel version 1.1.59, with SCSI + IDE support. \n\
\n\
This is a Linux kernel with full support for SCSI devices such as hard\n\
drives, tape drives, and CD-ROM drives. This kernel also contains\n\
UMSDOS and PPP.  See the file 'config.in' for an exact list of \n\
included drivers.\n\
\n\
***IMPORTANT***!  If you have special hardware, such as a non-SCSI\n\
CD-ROM drive, you'll need to install a kernel from the Q series that\n\
supports it, or compile the support into your own custom kernel.\n\
\n\
" 13 75
 installpkg a1/scsikern.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"sysvinit"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package sysvinit to run from CD" --infobox \
"SysV style init v. 2.4\n\
\n\
System V style init programs by Miquel van Smoorenburg that control\n\
the booting and shutdown of your system. These support a number of\n\
system runlevels, each with a specific set of utilities spawned. For\n\
example, the normal system runlevel is 5, which starts getty on \n\
virtual consoles tty1 - tty6. Runlevel 6 starts xdm. Runlevel 0 shuts\n\
the system down. See the documentation in /usr/doc/SysVinit-2.4 and\n\
the scripts in /etc/rc.d for more information.\n\
\n\
" 12 75
 installpkg a1/sysvinit.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"bin"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package bin to run from CD" --infobox \
"Binaries that go in /bin and /usr/bin.\n\
\n\
System utilities and programs, such as GNU fileutils 3.9,\n\
elvis 1.8pl3, at-2.7, Dillon's crond 3.0p1, file-3.9, GNU gawk 2.15.5,\n\
man-1.3, modules.tar.gz, GNU patch 2.1, GNU sed 2.05, shar, time-1.6,\n\
splitvt-1.5.2, tput-1.0, unarj-230, Slackware's color-enabled ls (uses\n\
/etc/DIR_COLORS for configuration), and zoo-2.10.\n\
\n\
" 10 75
 installpkg a2/bin.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"getty"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package getty to run from CD" --infobox \
"getty_ps 2.0.7e\n\
\n\
/sbin/getty and /sbin/uugetty. \n\
These control the process of logging into your system, and may be used\n\
instead of 'agetty', which is the default getty included with\n\
util-linux-1.6. getty_ps supports a number of enhancements such as\n\
ringback support.\n\
\n\
" 10 75
 installpkg a2/getty.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"gzip"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package gzip to run from CD" --infobox \
"GNU zip compression utilities. (v. 1.2.4)\n\
\n\
Gzip reduces the size of the named files using Lempel-Ziv coding\n\
(LZ77).  Whenever possible, each file is replaced by one with the\n\
extension .gz, while keeping the same ownership modes, access and\n\
modification times.\n\
\n\
" 9 75
 installpkg a2/gzip.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"ldso"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package ldso to run from CD" --infobox \
"ld.so 1.4.4, the dynamic linker/loader.\n\
\n\
ld.so completes the final process of linking all necessary references\n\
to sharable objects and unreferenced symbols in an impure executable,\n\
(usually a dynamically linked executable), to produce a runnable file.\n\
Nearly all Linux binaries in a.out format will be 'incomplete' and\n\
require further linking at run time. ld.so's job is thus to complete\n\
the linking process started at compilation. ld.so was written by David\n\
Engel, Eric Youngdale, Peter MacDonald, Hongjiu Lu, Linus Torvalds,\n\
Lars Wirzenius and Mitch D'Souza.\n\
\n\
" 13 75
 installpkg a2/ldso.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"ps"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package ps to run from CD" --infobox \
"procps 0.97 \n\
Utilities for displaying process and memory information written by\n\
Michael K. Johnson, Werner Almesberger, Branko Lankester, Robert \n\
Nation, David Engel, Larry Greenfield, Roger Binns, and Brian Edmonds.\n\
Also includes Steve 'Mr. Bassman' Bryant's enhanced 'w', which does \n\
the CPU accounting a little differently, keeping a running total for \n\
all processes even after the processes have completed.\n\
" 9 75
 installpkg a2/ps.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"shlibs"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package shlibs to your hard drive" --infobox \
"The shared C libraries libc.so.4.5.26 and libm.so.4.5.26. \n\
\n\
H.J. Lu's port of the GNU shared C libraries - needed to run programs\n\
linked with the /lib/libc.so.4.*.*  and /lib/libm.so.4.*.* libraries.\n\
\n\
" 7 75
 installpkg a2/shlibs.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"util"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package util to run from CD" --infobox \
"util-linux 1.10\n\
\n\
Selected utilities compiled from Rik Faith's huge utility collection:\n\
agetty arch banner cal chroot chsh clear clock col colcrt colrm \n\
column ctrlaltdel dmesg domainname fdformat fdisk frag fsck hexdump\n\
ipcrm ipcs kbdrate kill last logger login look mesg mkfs.minix mkswap\n\
more mount newgrp passwd pwd rdev renice reset rev script setfdprm\n\
setserial setsid setterm simpleinit sln strings swapoff swapon sync\n\
syslogd tsort tunelp ul umount update wall whereis write zdump zic \n\
zones\n\
\n\
" 13 75
 installpkg a2/util.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"bash"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package bash to your hard drive" --infobox \
"GNU bash-1.14.2\n\
\n\
The GNU Bourne-Again SHell.  Bash is a sh-compatible command language\n\
interpreter that executes commands read from the standard input or \n\
from a file.  Bash also incorporates useful features from the Korn\n\
and C shells (ksh and csh).  Bash is ultimately intended to be a \n\
conformant implementation of the IEEE Posix Shell and Tools\n\
specification (IEEE Working Group 1003.2).\n\
\n\
Bash must be present for the system to boot properly.\n\
\n\
" 13 75
 installpkg a3/bash.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"comms"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package comms to run from CD" --infobox \
"Serial file-transfer and communication packages.\n\
\n\
Includes these programs:\n\
\n\
Minicom - a full featured menu-driven communications package similar\n\
to the DOS program 'Telix'.\n\
\n\
sz/rz - utilities used to upload and download files using the Zmodem\n\
protocol.\n\
\n\
" 12 75
 installpkg a3/comms.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"cpio"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package cpio to run from CD" --infobox \
"The GNU cpio backup and archiving utility v. 2.3\n\
\n\
This is GNU cpio, a program to manage archives of files. This package\n\
also includes mt, a tape drive control program. cpio copies files into\n\
or out of a cpio or tar archive, which is a file that contains other\n\
files plus information about them, such as their pathname, owner,\n\
timestamps, and access permissions. The archive can be another file on\n\
the disk, a magnetic tape, or a pipe.\n\
\n\
" 11 75
 installpkg a3/cpio.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"e2fsbn"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package e2fsbn to run from CD" --infobox \
"Utilities for the second extended file system v. 0.5a\n\
\n\
Utilities needed to create and maintain ext2 filesystems under Linux.\n\
Included in this package are: chattr, lsattr, mke2fs, mklost+found,\n\
tune2fs, e2fsck, and badblocks. \n\
\n\
These utilities were written by Remy Card (the developer and\n\
maintainer of the ext2 fs) and Theodore T'so.\n\
\n\
" 11 75
 installpkg a3/e2fsbn.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"find"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package find to run from CD" --infobox \
"GNU find 3.8\n\
\n\
This package contains the GNU find, xargs, and locate programs.\n\
find and xargs comply with POSIX 1003.2, as far as I know.  They\n\
also support some additional options, some borrowed from Unix and\n\
some unique to GNU.\n\
\n\
" 9 75
 installpkg a3/find.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"gpm"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package gpm to run from CD" --infobox \
"General purpose mouse support v0.17\n\
\n\
This program is based on the 'selection' package, and allows you to\n\
use the mouse to cut and paste text from the screen.  It also acts as\n\
a mouse server for applications running on the Linux console, such as \n\
the (now inaccurately named) MouseLess Commander and dialog.  NOTE:\n\
This program may cause problems when you start X on systems that do\n\
not use a serial mouse.  If you get an 'unable to open mouse device'\n\
error from X, remove gpm from /etc/rc.d/rc.local.\n\
\n\
" 12 75
 installpkg a3/gpm.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"grep"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package grep to run from CD" --infobox \
"GNU grep 2.0\n\
\n\
Grep searches the named input files (or standard input if no files are\n\
named, or the file name - is given) for lines containing a match to\n\
the given pattern.  This is the 'fastest grep in the west' (we hope).\n\
\n\
" 8 75
 installpkg a3/grep.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"keytbls"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package keytbls to run from CD" --infobox \
"kbd 0.88\n\
\n\
Load and save keyboard mappings. Needed if you are not using the US\n\
keyboard map. This package also contains utilities to change your\n\
console fonts - if you install it you'll get a menu later on that lets\n\
you select from many different fonts. If you like one, you can make it\n\
your default font. A new default font can be chosen at any time by\n\
typing 'fontconfig'. This package includes fonts from the \n\
kbd_fonts.tar.gz package uploaded to Sunsite.\n\
\n\
" 12 75
 installpkg a3/keytbls.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"less"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package less to run from CD" --infobox \
"less-237\n\
\n\
Less is a paginator similar to more (1), but which allows backward\n\
movement in the file as well as forward movement. Also, less does not\n\
have to read the entire input file before starting, so with large\n\
input files it starts up faster than text editors like vi (1). \n\
\n\
Less was written by Mark Nudelman.\n\
\n\
" 11 75
 installpkg a3/less.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"lpr"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package lpr to run from CD" --infobox \
"BSD print spooling system.                           \n\
\n\
NOTE: The lpd binary included in this package expects to find\n\
TCP/IP running if TCP/IP support is found in the Linux kernel. If\n\
you do not plan to install the TCP/IP package, then you will have \n\
to recompile your kernel removing TCP/IP support. If you do not, \n\
lpd will die immediately after it is started.\n\
\n\
" 10 75
 installpkg a3/lpr.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"shellutl"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package shellutl to run from CD" --infobox \
"GNU shellutils 1.9.4\n\
\n\
This is a package of small shell programming utilities.  They are\n\
mostly compliant with POSIX.2, where applicable.\n\
\n\
The programs in this package are:\n\
basename date dirname echo env expr false logname nice hohup\n\
pathchk printenv printf sleep stty tee test true tty uname\n\
who whoami yes\n\
\n\
" 12 75
 installpkg a3/shellutl.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"syslogd"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package syslogd to run from CD" --infobox \
"Sysklogd 1.2\n\
\n\
Dr. Greg Wettstein and Stephen Tweedie's syslogd/klogd.\n\
\n\
This package contains a modified version of syslogd for the Linux\n\
environment.  An additional utility, klogd, is included which allows\n\
kernel logging to be directed through the syslogd facility.\n\
Syslogd and klogd are started when your system boots.\n\
\n\
" 11 75
 installpkg a3/syslogd.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"tar"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package tar to run from CD" --infobox \
"GNU tar 1.11.2\n\
\n\
Tape ARchiver - adds and extracts files and directories to/from tape\n\
or archive files. This version of tar also supports archive \n\
compression using GNU zip.\n\
\n\
" 8 75
 installpkg a3/tar.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"textutl"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package textutl to run from CD" --infobox \
"GNU textutil 1.9\n\
\n\
These are the GNU text file (actually, file contents) processing\n\
utilities.  Most of these programs have significant advantages over\n\
their Unix counterparts, such as greater speed, additional options,\n\
and fewer arbitrary limits.\n\
\n\
The programs in this package are: cat, cksum, comm, csplit, cut, \n\
expand, fold, head, join, nl, od, paste, pr, sort, split,\n\
sum, tac, tail, tr, unexpand, uniq, and wc.\n\
\n\
" 13 75
 installpkg a3/textutl.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"zoneinfo"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package zoneinfo to run from CD" --infobox \
"Time zone utilities\n\
\n\
Allows you to configure your time zone. Look in /usr/lib/zoneinfo\n\
for instructions on how to set this up manually, or select your\n\
timezone from the menu during your system configuration.\n\
\n\
" 8 75
 installpkg a3/zoneinfo.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"etc"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package etc to run from CD" --infobox \
"System configuration files that go into the /etc directory.\n\
\n\
The /etc directory is traditionally the location where configuration\n\
files and administration binaries are found. Under Linux, the binaries\n\
have been moved out of the /etc directory and into the /sbin \n\
directory; the /etc directory is now reserved for configuration files\n\
only. \n\
\n\
" 10 75
 installpkg a4/etc.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"hdsetup"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package hdsetup to run from CD" --infobox \
"The Slackware setup/package maintenance system v. 2.1.0\n\
\n\
The full screen and tty versions of setup and pkgtool, two utilities\n\
included with Slackware that allow you to easily install software \n\
packages, remove software packages, and review the installed software\n\
packages.\n\
\n\
Also contains the command line utilities 'installpkg', 'removepkg',\n\
'makepkg', and 'explodepkg' that install, remove, build, and examine\n\
software packages. Man pages are included for all of these utilities.\n\
\n\
" 13 75
 installpkg a4/hdsetup.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"lilo"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package lilo to run from CD" --infobox \
"LILO 0.15\n\
\n\
Generic Boot Loader for Linux ('LInux LOader') by Werner Almesberger.\n\
LILO boots Linux from your hard drive. It can also boot other\n\
operating systems such as MS-DOS and OS/2, and can even boot DOS from\n\
the second hard drive. LILO comes with utilities and documentation\n\
that make it easier to install, such as 'liloconfig' and 'QuickStart'.\n\
NOTE: Installing boot loaders is inherently dangerous. Be sure to have\n\
some means to boot your system from a different media if you install\n\
LILO on your hard disk.\n\
\n\
" 13 75
 installpkg a4/lilo.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"loadlin"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package loadlin to your hard drive" --infobox \
"LOADLIN v1.5\n\
\n\
LOADLIN.EXE, a loader (running under DOS) for LINUX kernel images\n\
fully supporting the kernel's command line feature.  LOADLIN or\n\
BOOTLIN is the safest way to boot Linux (>0.99.14) from your hard\n\
disk. LOADLIN is (C) 1994 Hans Lermen (lermen@elserv.ffm.fgan.de) \n\
\n\
" 9 75
 installpkg a4/loadlin.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"tcsh"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package tcsh to run from CD" --infobox \
"tcsh 6.04\n\
\n\
tcsh is an enhanced but completely compatible version of the Berkeley\n\
UNIX C shell, csh(1). It is a command language interpreter usable both\n\
as an interactive login shell and a shell script command processor. It\n\
includes a command-line editor, programmable word completion, spelling\n\
correction, a history mechanism, job control, and a C-like syntax.\n\
\n\
" 10 75
 installpkg a4/tcsh.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"umsprogs"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package umsprogs to run from CD" --infobox \
"umsdos_progs 0.3a\n\
\n\
Various utilities needed by Jacques Gelinas' UMSDOS filesystem.\n\
\n\
" 6 75
 installpkg a4/umsprogs.tgz 1> /dev/null 2> /dev/null
fi
rm -f /tmp/return